EUVIMEDEUVIMED entdecken
Crossref

The preparation of polypropylene microfiber yarns via vortex airflow‐assisted melt differential electrospinning

Yuhang Wang, Jing Tan, Jinlong Xu, Haoyi Li, Weimin Yang

Journal of Applied Polymer Science · 20.05.2024 · 141 (20)

DOI: 10.1002/app.55382 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 15.03.2024. Verfasst von Yuhang Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 46 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polypropylene (PP) yarn possesses the advantages of low density and exceptional mechanical properties. Through electrospinning, fibers of PP yarns can be refined from 10 to 20 μm to an ultrafine level, thereby acquiring an enlarged specific surface area and more functional sites, expanding its application in high‐value areas. Herein, vortex airflow‐assisted polymer melt differential electrospinning was proposed to fabricate PP microfiber yarns. Under the influence of an electrostatic field, molten PP automatically splits into multiple jets that are further stretched and cooled into ultrafine fibers by suction airflow induced by vortex airflow. Subsequently, multiple ultrafine fibers were twisted into PP yarns using the vortex airflow. The effects of voltage, melt feed speed, and air pressure on the PP electrospun yams formation process as well as the morphology and mechanical properties of both the yarn and fibers were investigated. The results showed that the diameter of PP fibers ranged from 3 to 5 μm. The PP microfiber yams exhibited a relatively high mechanical strength of 1.6 cN/tex under conditions of 56 kV voltage, 0.22 g/min feed rate, and 0.3 MPa air pressure. Finally, the woven fabric made from electrospun PP yams demonstrated higher hydrophobicity compared with fabric woven from commercial PP filaments, suggesting potential applications in waterproof fabrics.

Zitieren

APA

Wang, Y., Tan, J., Xu, J., Li, H., & Yang, W. (2024). The preparation of polypropylene microfiber yarns via vortex airflow‐assisted melt differential electrospinning. Journal of Applied Polymer Science, 141(20). https://doi.org/10.1002/app.55382

Vancouver

Wang Y, Tan J, Xu J, Li H, Yang W. The preparation of polypropylene microfiber yarns via vortex airflow‐assisted melt differential electrospinning. Journal of Applied Polymer Science. 2024;141(20). doi:10.1002/app.55382

BibTeX
@article{Wang2024,
  author = {Wang, Yuhang and Tan, Jing and Xu, Jinlong and Li, Haoyi and Yang, Weimin},
  title = {The preparation of polypropylene microfiber yarns via vortex airflow‐assisted melt differential electrospinning},
  journal = {Journal of Applied Polymer Science},
  year = {2024},
  volume = {141},
  number = {20},
  doi = {10.1002/app.55382}
}
Kostenlos starten →