EUVIMEDEUVIMED entdecken
Crossref

Comparative study on the tribological properties of poly(arylene ether nitrile)/polytetrafluoroethylene composites: The influence of filler size and testing conditions

Weiyi Ding, Xionghou Peng, Jixiang Li, Zhengguang Heng, Shengtai Zhou, Huawei Zou

Journal of Applied Polymer Science · 10.01.2024 · 141 (2)

DOI: 10.1002/app.54794 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 20.10.2023. Verfasst von Weiyi Ding und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 33 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation, Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, the influence of polytetrafluoroethylene (PTFE) filler size and testing conditions (i.e., air, water, and lubricating oil) on the tribological properties of poly(arylene ether nitrile) (PEN) was systematically investigated. The results showed that the addition of PTFE was beneficial to improve the tribological properties of PEN‐based composites which was related to the easier formation of transfer film on the surface of friction pair. Samples which were tested in water demonstrated a relatively higher friction coefficient ( μ ) and wear loss when compared with those tested in dry air and lubricating oil scenarios, which was attributed to the fact that friction induced heat and wear debris could be timely removed by water. In addition, the infiltration of water further reduced the interaction between PTFE filler and PEN, which aggravated the wear loss of sample blocks. When tested in lubricating oil, pure PEN showed the lowest wear loss when compared with that of PEN/PTFE composites. At a given content (20 wt%) of PTFE fillers, PEN/PTFE 1.5μm exhibited the lowest μ in lubricating oil whereas PEN/PTFE 5μm demonstrated the lowest specific wear loss in air condition (1.18 × 10 −6 mm 3 /N·m). This work provided some useful information for the design and application of PTFE‐containing polymer composites that can be targeted in different lubrication scenarios in industrial fields.

Förderung

  • China Postdoctoral Science Foundation
  • Fundamental Research Funds for the Central Universities
  • National Natural Science Foundation of China

Zitieren

APA

Ding, W., Peng, X., Li, J., Heng, Z., Zhou, S., & Zou, H. (2024). Comparative study on the tribological properties of poly(arylene ether nitrile)/polytetrafluoroethylene composites: The influence of filler size and testing conditions. Journal of Applied Polymer Science, 141(2). https://doi.org/10.1002/app.54794

Vancouver

Ding W, Peng X, Li J, Heng Z, Zhou S, Zou H. Comparative study on the tribological properties of poly(arylene ether nitrile)/polytetrafluoroethylene composites: The influence of filler size and testing conditions. Journal of Applied Polymer Science. 2024;141(2). doi:10.1002/app.54794

BibTeX
@article{Ding2024,
  author = {Ding, Weiyi and Peng, Xionghou and Li, Jixiang and Heng, Zhengguang and Zhou, Shengtai and Zou, Huawei},
  title = {Comparative study on the tribological properties of poly(arylene ether nitrile)/polytetrafluoroethylene composites: The influence of filler size and testing conditions},
  journal = {Journal of Applied Polymer Science},
  year = {2024},
  volume = {141},
  number = {2},
  doi = {10.1002/app.54794}
}
Kostenlos starten →