EUVIMEDEUVIMED entdecken
Crossref

Preparation of Bi 2 O 3 @ PCPA‐KH590 /chloroprene composites with good mechanical properties under high‐filling

Jun Zeng, YingJun Li, YingChun Lu, YunPeng Li, HuiPing Liu, CongXiu Wu, MengXi Chen, Wei OuYang, YiPeng Zhang, YuanLin Zhou

Journal of Applied Polymer Science · 10.01.2024 · 141 (2)

DOI: 10.1002/app.54782 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 11.10.2023. Verfasst von Jun Zeng und 9 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: Southwest University of Science and Technology, State Key Laboratory of Environmental Friendly Energy Materials, SWUST.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As a “green” radiation protection material with the potential to replace lead oxide, bismuth oxide has more research applications in the field of γ protection. However, due to their different surface properties, there are compatibility and interaction problems between metal oxides and rubber. To enhance the performance of bismuth oxide in neoprene, Bi 2 O 3 @PCPA‐KH590 was prepared by coating bismuth oxide with polyphenol/polyamine and grafting KH590 on the surface of bismuth oxide. This allows for creating more active sites with the help of polyphenol/polyamine, enabling KH590 to be grafted onto bismuth oxide particles. The S functional group on the silane coupling agent is then cross‐linked with the rubber substrate, enhancing the dispersibility of the bismuth oxide powder. This improvement not only improves the dispersibility of the bismuth oxide powder but also enhances the mechanical properties of the rubber composite material. Compared with pure CR, the mechanical properties of 60 wt% filler‐modified powder composites can still be maintained at a high level, with the tensile strength reaching 12.83 Mpa. In sum, the proposed method appears feasible for preparing highly filled radiation protection rubber‐based materials.

Förderung

  • Southwest University of Science and Technology
  • State Key Laboratory of Environmental Friendly Energy Materials, SWUST

Zitieren

APA

Zeng, J., Li, Y., Lu, Y., Li, Y., Liu, H., Wu, C., Chen, M., OuYang, W., Zhang, Y., & Zhou, Y. (2024). Preparation of Bi 2 O 3 @ PCPA‐KH590 /chloroprene composites with good mechanical properties under high‐filling. Journal of Applied Polymer Science, 141(2). https://doi.org/10.1002/app.54782

Vancouver

Zeng J, Li Y, Lu Y, Li Y, Liu H, Wu C, et al. Preparation of Bi 2 O 3 @ PCPA‐KH590 /chloroprene composites with good mechanical properties under high‐filling. Journal of Applied Polymer Science. 2024;141(2). doi:10.1002/app.54782

BibTeX
@article{Zeng2024,
  author = {Zeng, Jun and Li, YingJun and Lu, YingChun and Li, YunPeng and Liu, HuiPing and Wu, CongXiu and Chen, MengXi and OuYang, Wei and Zhang, YiPeng and Zhou, YuanLin},
  title = {Preparation of Bi 2 O 3 @ PCPA‐KH590 /chloroprene composites with good mechanical properties under high‐filling},
  journal = {Journal of Applied Polymer Science},
  year = {2024},
  volume = {141},
  number = {2},
  doi = {10.1002/app.54782}
}
Kostenlos starten →