Selective Electrochemical Production of Ethylene from Bicarbonate Solution
Angewandte Chemie International Edition · 25.08.2025 · 64 (35)
DOI: 10.1002/anie.202509975 ↗Kurz gefasst
Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 17.07.2025. Verfasst von Behnam Nourmohammadi Khiarak und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Queen's University, Kingston, ON, K7L 3N6, Canada. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: FAPESP, Natural Sciences and Engineering Research Council of Canada, Fundação de Amparo à Pesquisa do Estado de São Paulo.
Abstract (Originalsprache)
Carbon dioxide (CO 2 ) electroreduction directly from a reactive carbon solution (e.g., (bi)carbonate) provides a promising approach for integrating CO 2 capture and conversion. Compared to CO 2 conversion in gas‐fed systems, this system typically suffers from low Faradaic efficiency (FE), especially for multicarbon (C 2+ ) products. Here, we report an engineered material structuring to selectively produce C 2+ products directly from a N 2 ‐saturated bicarbonate solution. Multiphysics modeling studies reveal the critical role of local current density distribution and the spatio‐selective evolution of C 2+ products, which is favored in thinner catalysts (240 µm thickness). By jointly tailoring catalyst configuration and mass transport in bicarbonate electroreduction, adjusting the thickness, porosity, and surface oxidation of copper (Cu) mesh catalysts, as well as catholyte composition, we achieved a maximum C 2 H 4 FE of 39% and total C 2+ FE over 55% at 150 mA cm −2 with a 240 µm thick Cu mesh. The system is also stable for over 160 h at 100 mA cm −2 with maintained C 2 H 4 FE over 20%. Our electrolysis system converts bicarbonate to C 2+ with over 90% CO 2 utilization efficiency, reducing regeneration and separation costs. Optimizing catalyst pore structure, and copper surface oxide is a key to maximizing C 2 H 4 production from bicarbonate solutions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, Queen's University, Kingston, ON, K7L 3N6, Canada.
- Interdisciplinary Laboratory of Electrochemistry and Ceramics, Department of Chemistry, Federal University of Sao Carlos, São Carlos, SP, 13565-905, Brazil.
- Department of Mechanical and Materials Engineering, Queen's University, Kingston, Ontario, K7P 3N6, Canada.
- CERT Systems Inc., Toronto, Ontario, M6N 2J1, Canada.
- ICFO - Institut de Ciències Fotòniques, The Barcelona Institute of Science and Technology, Barcelona, 08860, Spain.
ORCID-Profile: Cao-Thang Dinh
Förderung
- FAPESP
- Natural Sciences and Engineering Research Council of Canada
- Fundação de Amparo à Pesquisa do Estado de São Paulo
Zitieren
APA
Khiarak, B. N., da Silva, G. T. S. T., Crane, J., O'Brien, C. P., Pepe, M. R., Gabardo, C. M., Golovanova, V., García de Arquer, F. P., & Dinh, C. T. (2025). Selective Electrochemical Production of Ethylene from Bicarbonate Solution. Angewandte Chemie International Edition, 64(35). https://doi.org/10.1002/anie.202509975
Vancouver
Khiarak BN, da Silva GTST, Crane J, O'Brien CP, Pepe MR, Gabardo CM, et al. Selective Electrochemical Production of Ethylene from Bicarbonate Solution. Angewandte Chemie International Edition. 2025;64(35). doi:10.1002/anie.202509975
BibTeX
@article{Khiarak2025,
author = {Khiarak, Behnam Nourmohammadi and da Silva, Gelson T S T and Crane, Jackson and O'Brien, Colin P and Pepe, Michael R and Gabardo, Christine M and Golovanova, Viktoria and García de Arquer, F Pelayo and Dinh, Cao-Thang},
title = {Selective Electrochemical Production of Ethylene from Bicarbonate Solution},
journal = {Angewandte Chemie International Edition},
year = {2025},
volume = {64},
number = {35},
doi = {10.1002/anie.202509975}
}
EUVIMED