3D‐Printed COF/Zeolite Composites for Augmented Photocatalytic Hydrogen Peroxide Production
Angewandte Chemie International Edition · 04.08.2025 · 64 (32)
DOI: 10.1002/anie.202508226 ↗Kurz gefasst
Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 18.06.2025. Verfasst von Jingyi Feng und 8 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University, Changchun, 130012, P.R. China. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, the "111 Center".
Abstract (Originalsprache)
Covalent organic frameworks (COFs), characterized by high porosity and fine‐tuned structures, are promising photocatalysts for hydrogen peroxide (H 2 O 2 ) production. However, their hydrophobic nature restricts the mass transfer in water, presenting challenges in achieving high performance. Coupling COFs with hydrophilic zeolites can potentially advance H 2 O 2 production, yet integrating these two distinct types of porous materials is challenging. Herein, we first applied 3D printing technology to fabricate COF/zeolite composite catalysts, which enabled superior photosynthesis of H 2 O 2 . By precisely optimizing binders and prepolymerization conditions, homogeneous inks composed of zeolite nanocrystals and initial polymeric precursors were prepared with appropriate rheology for 3D printing. The resultant monolith with honeycomb‐like open‐channels was favorable for the in‐situ growth and crystallization of COF by facilitating the efficient molecular transfer of condensing agents and large covalent segments during solvothermal post‐treatment. Mechanistic studies indicated that introducing zeolites enhanced the hydrophilicity and O 2 affinity within the composite, favoring the oxygen reduction reaction pathway. Consequently, the photosynthesis of H 2 O 2 by the COF/zeolite composite was markedly improved by 52% compared to the bare COFs. This work provides a facile way to integrate COFs and zeolites by 3D printing, which may open diverse applications of such composites by taking advantage of both merits.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University, Changchun, 130012, P.R. China.
- International Center of Future Science, Jilin University, Changchun, 130012, P.R. China.
ORCID-Profile: Enquan Jin, Jihong Yu
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- the "111 Center"
Zitieren
APA
Feng, J., Wei, Y., Li, X., Wang, Q., Wang, B., Guo, Y., Feng, B., Jin, E., & Yu, J. (2025). 3D‐Printed COF/Zeolite Composites for Augmented Photocatalytic Hydrogen Peroxide Production. Angewandte Chemie International Edition, 64(32). https://doi.org/10.1002/anie.202508226
Vancouver
Feng J, Wei Y, Li X, Wang Q, Wang B, Guo Y, et al. 3D‐Printed COF/Zeolite Composites for Augmented Photocatalytic Hydrogen Peroxide Production. Angewandte Chemie International Edition. 2025;64(32). doi:10.1002/anie.202508226
BibTeX
@article{Feng2025,
author = {Feng, Jingyi and Wei, Yingzhen and Li, Xiao and Wang, Qifei and Wang, Bolun and Guo, Yunyu and Feng, Binyao and Jin, Enquan and Yu, Jihong},
title = {3D‐Printed COF/Zeolite Composites for Augmented Photocatalytic Hydrogen Peroxide Production},
journal = {Angewandte Chemie International Edition},
year = {2025},
volume = {64},
number = {32},
doi = {10.1002/anie.202508226}
}
EUVIMED