EUVIMEDEUVIMED entdecken
Crossref

In Situ Solid Conversion into Mechanically Adaptive LiF‐Rich Solid Electrolyte Interphase via MgF 2 Precursor on Si Surface in Lithium‐Ion Batteries

Jiayang Sun, Linze Lv, Yuchen Li, Yan Wang, Longfei Wang, Weixing Xiong, Lei Huang, Qunting Qu, Honghe Zheng iD

Angewandte Chemie International Edition · 21.07.2025 · 64 (30)

DOI: 10.1002/anie.202507688 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Angewandte Chemie International Edition, 2025-06. Verfasst von Jiayang Sun und 8 weiteren Autor:innen. Beteiligte Einrichtung: College of Energy & Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou, Jiangsu, 215006, P.R. China. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 54 Literaturangaben. Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silicon (Si) anodes hold exceptional promise for high‐energy‐density lithium‐ion batteries (LIBs) due to their ultrahigh theoretical capacity (∼4200 mAh g⁻¹). However, their commercialization is severely hindered by the significant volume expansion (∼300%) and unstable solid electrolyte interphase (SEI). Conventional SEI, predominantly composed of organic species, suffers from low ionic conductivity, low electronic insulation, and poor mechanical robustness, leading to rapid capacity decay. Herein, we propose an interface engineering strategy by decorating Si nanoparticles with an in situ conversed MgF 2 layer (with coating integrity of 94.2%). During initial lithiation, the applied MgF 2 layer is in situ conversed into SEI film with high ionic conductivity, electronic insulation, and better mechanical adaptability. The prepared Si@MgF 2 ‐1 anode achieves a high initial coulombic efficiency (91.7%), superior rate capability (2000 mAh g⁻¹ at 10 C), and remarkable cycling stability (1794.9 mAh g −1 after 500 cycles). Full‐cell based on the Si@MgF 2 ‐1 anode and NCM811 cathode further validate the practicality of this approach. The robust conversion strategy for the construction of a mechanically adaptive LiF‐rich SEI layer holds significant promise for the advancement of durable silicon‐based LIBs.

Schlagwörter

Stichwörter der Autor:innen

Lithium ion‐batteriesMgF2Silicon anodeSolid electrolyte interphase

Autor:innen und Institutionen

  • College of Energy & Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou, Jiangsu, 215006, P.R. China.
  • Huaying New Energy Materials. Co., Suzhou, Jiangsu, 215000, P.R. China.
  • School of Materials Science and Engineering, Suzhou University of Science and Technology, Suzhou, Jiangsu, 215011, P.R. China.

ORCID-Profile: Honghe Zheng

Förderung

  • National Key R&D Program of China
  • National Natural Science Foundation of China
  • National Key Research and Development Program of China

Zitieren

APA

Sun, J., Lv, L., Li, Y., Wang, Y., Wang, L., Xiong, W., Huang, L., Qu, Q., & Zheng, H. (2025). In Situ Solid Conversion into Mechanically Adaptive LiF‐Rich Solid Electrolyte Interphase via MgF 2 Precursor on Si Surface in Lithium‐Ion Batteries. Angewandte Chemie International Edition, 64(30). https://doi.org/10.1002/anie.202507688

Vancouver

Sun J, Lv L, Li Y, Wang Y, Wang L, Xiong W, et al. In Situ Solid Conversion into Mechanically Adaptive LiF‐Rich Solid Electrolyte Interphase via MgF 2 Precursor on Si Surface in Lithium‐Ion Batteries. Angewandte Chemie International Edition. 2025;64(30). doi:10.1002/anie.202507688

BibTeX
@article{Sun2025,
  author = {Sun, Jiayang and Lv, Linze and Li, Yuchen and Wang, Yan and Wang, Longfei and Xiong, Weixing and Huang, Lei and Qu, Qunting and Zheng, Honghe},
  title = {In Situ Solid Conversion into Mechanically Adaptive LiF‐Rich Solid Electrolyte Interphase via MgF 2 Precursor on Si Surface in Lithium‐Ion Batteries},
  journal = {Angewandte Chemie International Edition},
  year = {2025},
  volume = {64},
  number = {30},
  doi = {10.1002/anie.202507688}
}
Kostenlos starten →