EUVIMEDEUVIMED entdecken
Crossref

Niobium Phosphide‐Induced Sulfur Cathode Interface with Fast Lithium‐Ion Flux Enables Highly Stable Lithium–Sulfur Catalytic Conversion

Peng Wang, Hongyu Mou, Yu Wang, Ning Song, Xiaogang Li, Jinkui Feng, Baojuan Xi, Shenglin Xiong iD

Angewandte Chemie International Edition · 12.05.2025 · 64 (20)

DOI: 10.1002/anie.202502255 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 28.02.2025. Verfasst von Peng Wang und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry and Chemical Engineering, Shandong University, Jinan, 250100, China. Die Arbeit wurde bisher 66-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Research on the Li−S catalytic chemistry primarily focus on the development of high‐performance catalysts and the exploration of their reaction mechanisms, with limited attention given to the impact on the interface at the cathode. Moreover, regulating the Li + flux at the cathode interface can enhance Li 2 S conversion kinetics without compromising the intrinsic catalytic activity of catalyst. This work presents a paradigm that employs interface regulation to enhance Li−S battery (LSB) cycling stability. A novel phosphorus doped carbon supported niobium phosphide nanocrystals (NbP/PC) catalyst is developed and demonstrates exceptional intrinsic activity for lithium polysulfide conversion while it facilitates lithium salt dissociation through intermolecular hybridization. The NbP‐induced functional interface layer with abundant LiF and Li 3 N provides efficient Li + transport channel for Li 2 S decomposition, which further mitigates the passivation of active sites. In consequence, the assembled LSB exhibits a capacity retention rate of 0.04 % per cycle after 1100 cycles at a 1 C. Furthermore, the pouch battery with an energy density of 451 Wh kg −1 maintains stable performance over 20 cycles. This strategy addresses the limitations of traditional catalytic material design in the chemical regulation of the cathodic interface for promising future of LSBs.

Schlagwörter

Stichwörter der Autor:innen

Li2S decompositionNiobium phosphidecatalytic materiallithium–sulfur batteriespassivation of active sites

Autor:innen und Institutionen

  • School of Chemistry and Chemical Engineering, Shandong University, Jinan, 250100, China.
  • College of Biological and Chemical Engineering, Qilu Institute of Technology, Jinan, 250200, China.
  • School of Materials Science and Engineering, Shandong University, Jinan, 250061, China.

ORCID-Profile: Shenglin Xiong

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wang, P., Mou, H., Wang, Y., Song, N., Li, X., Feng, J., Xi, B., & Xiong, S. (2025). Niobium Phosphide‐Induced Sulfur Cathode Interface with Fast Lithium‐Ion Flux Enables Highly Stable Lithium–Sulfur Catalytic Conversion. Angewandte Chemie International Edition, 64(20). https://doi.org/10.1002/anie.202502255

Vancouver

Wang P, Mou H, Wang Y, Song N, Li X, Feng J, et al. Niobium Phosphide‐Induced Sulfur Cathode Interface with Fast Lithium‐Ion Flux Enables Highly Stable Lithium–Sulfur Catalytic Conversion. Angewandte Chemie International Edition. 2025;64(20). doi:10.1002/anie.202502255

BibTeX
@article{Wang2025,
  author = {Wang, Peng and Mou, Hongyu and Wang, Yu and Song, Ning and Li, Xiaogang and Feng, Jinkui and Xi, Baojuan and Xiong, Shenglin},
  title = {Niobium Phosphide‐Induced Sulfur Cathode Interface with Fast Lithium‐Ion Flux Enables Highly Stable Lithium–Sulfur Catalytic Conversion},
  journal = {Angewandte Chemie International Edition},
  year = {2025},
  volume = {64},
  number = {20},
  doi = {10.1002/anie.202502255}
}
Kostenlos starten →