Constructing Mechanical–Chemical Stability via Multiphase Riveting and Interface Optimization Toward Layer‐structured Oxide Cathode Material
Angewandte Chemie International Edition · 26.05.2025 · 64 (22)
DOI: 10.1002/anie.202500939 ↗Kurz gefasst
Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 04.04.2025. Verfasst von Dongrun Yang und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Energy Electrochemistry and Urban Mines Metallurgy, School of Metallurgy, Northeastern University, Shenyang, Liaoning, 110819, P.R. Chi…. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 85 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Manganese‐based layer‐structured oxide materials are considered as one of the most competitive cathode materials for sodium‐ion batteries due to their low cost and efficient sodium intercalation chemistry. Their electrochemical performance, however, is hindered by mechanical and chemical failures stemming from weak interlayer interactions, the Jahn–Teller effect of Mn 3+ and unstable surfaces. To address these issues, a quenching method was employed to fabricate a robust multiphase structure with a fluorine and dislocation‐rich surface. Through the accumulation of dislocations and the interlocking of multiphase structures, the mechanical stability of the material during (de)sodiation processes is enhanced, while the surface fluorine anchoring further strengthens the chemical stability. Even after 200 cycles at 0.5 C and 1 C within the voltage range of 1.5–4.5 V, the designed composite material P2/P3/O3‐Na 0.89 Ni 0.3 Mn 0.55 Cu 0.1 Ti 0.05 O 1.94 F 0.06 exhibits impressive capacity retention rates of 87.17% and 90.4%, respectively. This work exemplifies the important role of simultaneous design of mechano‐chemically coupled materials for the development of high performances cathode materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Energy Electrochemistry and Urban Mines Metallurgy, School of Metallurgy, Northeastern University, Shenyang, Liaoning, 110819, P.R. China.
- Institute of Metal Research, Chinese Academy of Sciences, Shenyang, Liaoning, P.R. China.
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), College of Chemistry, Nankai University, Tianjin, 300071, P.R. China.
- Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, P.R. China.
- Australian Synchrotron (ANSTO), 800 Blackburn Rd, Clayton, Victoria, 3168, Australia.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Yang, D., Liu, C., Gao, X. W., Zhao, Z., Gu, Q., Long, Y., Lai, Q., Chen, H., Liu, Z., & Luo, W. B. (2025). Constructing Mechanical–Chemical Stability via Multiphase Riveting and Interface Optimization Toward Layer‐structured Oxide Cathode Material. Angewandte Chemie International Edition, 64(22). https://doi.org/10.1002/anie.202500939
Vancouver
Yang D, Liu C, Gao XW, Zhao Z, Gu Q, Long Y, et al. Constructing Mechanical–Chemical Stability via Multiphase Riveting and Interface Optimization Toward Layer‐structured Oxide Cathode Material. Angewandte Chemie International Edition. 2025;64(22). doi:10.1002/anie.202500939
BibTeX
@article{Yang2025,
author = {Yang, Dongrun and Liu, Chen and Gao, Xuan-Wen and Zhao, Zhiwei and Gu, Qinfen and Long, Yutong and Lai, Qingsong and Chen, Hong and Liu, Zhaomeng and Luo, Wen-Bin},
title = {Constructing Mechanical–Chemical Stability via Multiphase Riveting and Interface Optimization Toward Layer‐structured Oxide Cathode Material},
journal = {Angewandte Chemie International Edition},
year = {2025},
volume = {64},
number = {22},
doi = {10.1002/anie.202500939}
}
EUVIMED