EUVIMEDEUVIMED entdecken
Crossref

Charge Tuning and Anchor Effect Achieving Stable High‐Voltage Layered Metal Oxides for Sodium‐Ion Battery

Jialin Kuang, Zhuoming Liu, Liang Fu, You Shi, Mengjie Zhang, Yan Wang, Ning Ding, Dan Sun, Yougen Tang, Haiyan Wang

Angewandte Chemie International Edition · 19.05.2025 · 64 (21)

DOI: 10.1002/anie.202500715 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 24.03.2025. Verfasst von Jialin Kuang und 9 weiteren Autor:innen. Beteiligte Einrichtung: Hunan Provincial Key Laboratory of Chemical Power Sources, College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083,…. Die Arbeit wurde bisher 100-mal zitiert (Crossref) und nennt 53 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Hunan Provincial Nature Science Foundation of China, Fundamental Research Funds for the Central South Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Layered metal oxides (LMOs) that can stably operate at high voltage are vital to developing high‐energy sodium‐ion batteries (SIBs). However, the irreversible oxygen redox reaction of LMOs at the high voltage region (i.e., >4.0 V vs. Na + /Na) will cause serious oxygen evolution and structural instability, and therefore sharp capacity fading. Herein, we report the charge tuning and anchor effect of La doping to enhance the cycling stability of layered NaNi 1/3 Fe 1/3 Mn 1/3 O 2 (NFM) under extreme conditions (e.g., high voltage and temperature). The La doping introduces additional negative charges to the oxygen ligands of transition metals (TM) and facilitates charge transfer, thereby reducing oxygen evolution at 4.1 V and enhancing the kinetics of the redox process. Moreover, the as‐formed LaO 6 octahedra serve as stable anchors for the TM layers, preventing the formation of lattice nanocracks. As a result, the La‐modified NFM exhibits a high capacity of 173.4 mAh g −1 at 0.1C (1C = 150 mA g −1 ) and capacity retention of 71.21% at 2.0–4.2 V after 500 cycles at 1C, which are higher than those of NFM. Additionally, the full cell achieves a high energy density of 438.78 Wh kg −1 (based on cathode mass), with a retention of 70.2% over 400 cycles, implying the great application potential of this concept.

Schlagwörter

Stichwörter der Autor:innen

High VoltageLa dopingO3‐Type layered metal oxidesOxygen releaseSodium ion battery

Autor:innen und Institutionen

  • Hunan Provincial Key Laboratory of Chemical Power Sources, College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, P.R. China.
  • College of Materials Science and Engineering, Chongqing University, Chongqing, 400045, P.R. China.

Förderung

  • National Natural Science Foundation of China
  • Hunan Provincial Nature Science Foundation of China
  • Fundamental Research Funds for the Central South Universities
  • Hunan Provincial Science and Technology Plan Projects of China
  • Natural Science Foundation of Chongqing
  • Young Elite Scientists Sponsorship Program
  • Natural Science Foundation of Chongqing Municipality

Zitieren

APA

Kuang, J., Liu, Z., Fu, L., Shi, Y., Zhang, M., Wang, Y., Ding, N., Sun, D., Tang, Y., & Wang, H. (2025). Charge Tuning and Anchor Effect Achieving Stable High‐Voltage Layered Metal Oxides for Sodium‐Ion Battery. Angewandte Chemie International Edition, 64(21). https://doi.org/10.1002/anie.202500715

Vancouver

Kuang J, Liu Z, Fu L, Shi Y, Zhang M, Wang Y, et al. Charge Tuning and Anchor Effect Achieving Stable High‐Voltage Layered Metal Oxides for Sodium‐Ion Battery. Angewandte Chemie International Edition. 2025;64(21). doi:10.1002/anie.202500715

BibTeX
@article{Kuang2025,
  author = {Kuang, Jialin and Liu, Zhuoming and Fu, Liang and Shi, You and Zhang, Mengjie and Wang, Yan and Ding, Ning and Sun, Dan and Tang, Yougen and Wang, Haiyan},
  title = {Charge Tuning and Anchor Effect Achieving Stable High‐Voltage Layered Metal Oxides for Sodium‐Ion Battery},
  journal = {Angewandte Chemie International Edition},
  year = {2025},
  volume = {64},
  number = {21},
  doi = {10.1002/anie.202500715}
}
Kostenlos starten →