Practical High‐Voltage Lithium Metal Batteries Enabled by the In‐Situ Fabrication of Main‐Chain Fluorinated Polymer Electrolytes
Angewandte Chemie International Edition · 11.04.2025 · 64 (16)
DOI: 10.1002/anie.202424685 ↗Kurz gefasst
Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 14.02.2025. Verfasst von Jie Zhu und 14 weiteren Autor:innen. Beteiligte Einrichtung: The Centre of Nanoscale Science and Technology and Key Laboratory of Functional Polymer Materials, Institute of Polymer Chemistry, College of Chemist…. Die Arbeit wurde bisher 65-mal zitiert (Crossref) und nennt 64 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key R&D Program of China, Natural Science Foundation of Tianjin, China.
Abstract (Originalsprache)
Polymer electrolytes are crucial for advancing safe, high‐energy‐density lithium batteries. Therefore, such electrolytes must possess stability with high‐voltage cathodes and lithium metal, ensuring efficient interfacial contact and high room‐temperature ionic conductivity. In this study, we present a novel main‐chain fluorinated polymer electrolyte, FEOP, synthesized through cationic ring‐opening polymerization. FEOP integrates high oxidative resistance of polytetrafluoroethylene with lithium metal compatibility of polyether, achieving an oxidation potential of up to 5.6 V and an anion‐involved solvation structure. The exceptional stability enables NCM811 cells to deliver an impressive cycling life of 2000 cycles at 1 C up to 4.5 V. Furthermore, at ultra‐high cut‐off voltages of 4.7 and 4.9 V, both NCM811 and LNMO cells demonstrate stable cycling over 700 cycles, marking the longest lifespan for polymer‐based batteries under these challenging conditions. Moreover, 4.7 V solid‐state lithium metal pouch cells incorporating FEOP exhibit an energy density of 405.3 Wh kg −1 and maintain stable cycling over 70 cycles, while successfully passing industry‐standard nail penetration tests. Moreover, FEOP demonstrate excellent compatibility with ultra‐high‐loading electrode (70 mg cm −2 ), achieving an exceptional areal capacity of 16.2 mAh cm −2 . These results provide a solid foundation for designing practical electrolytes that enable next‐generation high‐energy‐density and high‐safety solid‐state batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- The Centre of Nanoscale Science and Technology and Key Laboratory of Functional Polymer Materials, Institute of Polymer Chemistry, College of Chemistry, Nankai University, Tianjin, 300071, China.
- Renewable Energy Conversion and Storage Center (RECAST), Nankai University, Tianjin, 300071, China E-mail: s.
- Tianjin Plannano Technology Company Limited, Tianjin, 300071, China.
- State Key Laboratory of Elemento-Organic Chemistry, Nankai University, Tianjin, 300071, China.
ORCID-Profile: Yongsheng Chen
Förderung
- National Natural Science Foundation of China
- National Key R&D Program of China
- Natural Science Foundation of Tianjin, China
- National Key Research and Development Program of China
Zitieren
APA
Zhu, J., Bian, P., Sun, G., Zhang, J., Lou, G., Song, X., Zhao, R., Liu, J., Xu, N., Li, A., Wan, X., Ma, Y., Li, C., Zhang, H., & Chen, Y. (2025). Practical High‐Voltage Lithium Metal Batteries Enabled by the In‐Situ Fabrication of Main‐Chain Fluorinated Polymer Electrolytes. Angewandte Chemie International Edition, 64(16). https://doi.org/10.1002/anie.202424685
Vancouver
Zhu J, Bian P, Sun G, Zhang J, Lou G, Song X, et al. Practical High‐Voltage Lithium Metal Batteries Enabled by the In‐Situ Fabrication of Main‐Chain Fluorinated Polymer Electrolytes. Angewandte Chemie International Edition. 2025;64(16). doi:10.1002/anie.202424685
BibTeX
@article{Zhu2025,
author = {Zhu, Jie and Bian, Peiran and Sun, Guolin and Zhang, Jinping and Lou, Genglin and Song, Xingchen and Zhao, Ruiqi and Liu, Jie and Xu, Nuo and Li, Aihong and Wan, Xiangjian and Ma, Yanfeng and Li, Chenxi and Zhang, Hongtao and Chen, Yongsheng},
title = {Practical High‐Voltage Lithium Metal Batteries Enabled by the In‐Situ Fabrication of Main‐Chain Fluorinated Polymer Electrolytes},
journal = {Angewandte Chemie International Edition},
year = {2025},
volume = {64},
number = {16},
doi = {10.1002/anie.202424685}
}
EUVIMED