Electrolyte Design Using “Porous Water” for High‐purity Carbon Monoxide Electrosynthesis from Dilute Carbon Dioxide
Angewandte Chemie International Edition · 11.04.2025 · 64 (16)
DOI: 10.1002/anie.202424104 ↗Kurz gefasst
Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 12.02.2025. Verfasst von Wei Zhang und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Hunan University, Changsha, 410004, China. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 87 Literaturangaben. Gefördert von: Intergovernmental International Science and Technology Innovation Cooperation Program of the National Key Research and Development Program, Natural Science Foundation of Hunan Province.
Abstract (Originalsprache)
Electrosynthesis of high‐purity carbon monoxide (CO) from captured carbon dioxide (CO 2 ) remains energy‐intensive due to the unavoidable CO 2 regeneration and post‐purification stages. Here, we propose a direct high‐purity CO electrosynthesis strategy employing an innovative electrolyte, termed porous electrolyte (PE), based on “porous water”. Zeolite nanocrystals within PE provide permanent pores in the liquid phase, enabling physical CO 2 adsorption through an intraparticle diffusion model, as demonstrated by molecular dynamics simulations and in situ spectral analysis. Captured CO 2 spontaneously desorbs under applied reductive potential, driven by the interfacial CO 2 concentration gradient, and is subsequently reduced electrochemically. The high CO 2 concentration in PE enhances mass transfer, and surface ion exchange between Si−OH groups and K + ions on the zeolite surface generates a stronger interfacial electric field, promoting electron transfer steps. This optimized kinetics for mass and electron transfer confers heightened intrinsic activity toward CO 2 electroreduction. The PE‐based electrolysis system demonstrated superior CO Faradaic efficiency and partial current density compared to the conventional CO 2 ‐fed system. A circular system using PE and a Ni−N/C cathode realized continuous production of high‐purity CO (97.0 wt %) from dilute CO 2 (15 %) and maintained >90.0 wt % under 150 mA cm −2 , with significantly reduced energy consumption and costs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science and Engineering, Hunan University, Changsha, 410004, China.
- State Key Laboratory of Chem/Bio-Sensing and Chemometrics, Advanced Catalytic Engineering Research Center of the Ministry of Education, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082,…
ORCID-Profile: Shiguo Zhang
Förderung
- Intergovernmental International Science and Technology Innovation Cooperation Program of the National Key Research and Development Program
- Natural Science Foundation of Hunan Province
Zitieren
APA
Zhang, W., Dai, M., Zeng, Z., Wang, Y., Zhang, Y., Ni, W., Wang, S., & Zhang, S. (2025). Electrolyte Design Using “Porous Water” for High‐purity Carbon Monoxide Electrosynthesis from Dilute Carbon Dioxide. Angewandte Chemie International Edition, 64(16). https://doi.org/10.1002/anie.202424104
Vancouver
Zhang W, Dai M, Zeng Z, Wang Y, Zhang Y, Ni W, et al. Electrolyte Design Using “Porous Water” for High‐purity Carbon Monoxide Electrosynthesis from Dilute Carbon Dioxide. Angewandte Chemie International Edition. 2025;64(16). doi:10.1002/anie.202424104
BibTeX
@article{Zhang2025,
author = {Zhang, Wei and Dai, Minyang and Zeng, Zhouliangzi and Wang, Yahan and Zhang, Yan and Ni, Wenpeng and Wang, Shuangyin and Zhang, Shiguo},
title = {Electrolyte Design Using “Porous Water” for High‐purity Carbon Monoxide Electrosynthesis from Dilute Carbon Dioxide},
journal = {Angewandte Chemie International Edition},
year = {2025},
volume = {64},
number = {16},
doi = {10.1002/anie.202424104}
}
EUVIMED