High‐Efficiency Perovskite Solar Cells Enabled by Guanylation Reaction for Removing MACl Residual and In‐Situ Forming 2D Perovskite
Angewandte Chemie International Edition · 10.02.2025 · 64 (7)
DOI: 10.1002/anie.202419070 ↗Kurz gefasst
Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 21.01.2025. Verfasst von Zhuang Xie und 9 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, Chengdu, 610059, P. R. China. Die Arbeit wurde bisher 61-mal zitiert (Crossref) und nennt 71 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
The thermodynamical deprotonation of methylammonium chloride (MACl) has several detrimental influences on the quality of formamidinium (FA + )‐based perovskite, which limits both efficiency and stability of inverted perovskite solar cells (IPSCs). Herein, a new additive strategy was developed by introducing methyl carbamimidothioate hydroiodide (MCH) into perovskite precursor, where guanylation reaction occurred between MCH and MACl to form a new intermediate of methyl‐substituted guanidine (MSG). MSG could then bond with undercoordinated Pb 2+ to in situ form a two‐dimensional (2D) perovskite, which would promote the growth and crystallization of three‐dimensional (3D) perovskite with higher crystallinity, lower defect‐states density and superior stability. Finally, the MCH‐treated IPSC with a small area (0.09 cm 2 ) achieved an impressive power conversation efficiency (PCE) of 26.81 % (certified as 26.02 %), which is one of the highest PCEs reported to date. The large area MCH‐treated device (1.00 cm 2 ) also obtained a high PCE of 24.36 %. Moreover, the unencapsulated and MCH‐treated device exhibited excellent operational stability, maintaining 91.95 % and 97.06 % of their initial efficiencies after aging in air and a nitrogen‐filled atmosphere at 85 °C for 1200 h. The encapsulated MCH‐treated devices retained 94.25 % of its initial efficiency after continuously tracking at the maximum power‐point for 1200 h in air.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials and Chemistry & Chemical Engineering, Chengdu University of Technology, Chengdu, 610059, P. R. China.
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Lab for Advanced Energy Technology School of Materials Science and…
- College of Polymer Science and Engineering, Sichuan University, Chengdu, 610065, P. R. China.
- Key Laboratory of Optoelectronic Technology & Systems, Ministry of Education, Chongqing University, Chongqing, 400044, P. R. China.
- School of Chemical Engineering and State Key Laboratory of Polymer Materials Engineering, Sichuan University, Chengdu, 610065, P. R. China.
ORCID-Profile: Qiang Peng
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Xie, Z., Duan, Y., Cheng, M., Li, Y., Liu, Z., Li, H., Chen, Y., Zang, Z., Liu, S., & Peng, Q. (2025). High‐Efficiency Perovskite Solar Cells Enabled by Guanylation Reaction for Removing MACl Residual and In‐Situ Forming 2D Perovskite. Angewandte Chemie International Edition, 64(7). https://doi.org/10.1002/anie.202419070
Vancouver
Xie Z, Duan Y, Cheng M, Li Y, Liu Z, Li H, et al. High‐Efficiency Perovskite Solar Cells Enabled by Guanylation Reaction for Removing MACl Residual and In‐Situ Forming 2D Perovskite. Angewandte Chemie International Edition. 2025;64(7). doi:10.1002/anie.202419070
BibTeX
@article{Xie2025,
author = {Xie, Zhuang and Duan, Yuwei and Cheng, Minghui and Li, Yong and Liu, Zhike and Li, Hongxiang and Chen, Yu and Zang, Zhigang and Liu, Shengzhong and Peng, Qiang},
title = {High‐Efficiency Perovskite Solar Cells Enabled by Guanylation Reaction for Removing MACl Residual and In‐Situ Forming 2D Perovskite},
journal = {Angewandte Chemie International Edition},
year = {2025},
volume = {64},
number = {7},
doi = {10.1002/anie.202419070}
}
EUVIMED