Engineering Stable Decomposition Products on Cathode Surfaces to Enable High Voltage All‐Solid‐State Batteries
Angewandte Chemie International Edition · 10.01.2025 · 64 (2)
DOI: 10.1002/anie.202413591 ↗Kurz gefasst
Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 04.12.2024. Verfasst von Lanting Qian und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry and the Waterloo Institute of Nanotechnology, University of Waterloo, 200 University Ave, Waterloo ON, N2L 3G1, Canada. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bar Association of San Francisco, Natural Sciences and Engineering Research Council of Canada, Ontario Research Fund.
Abstract (Originalsprache)
Sulfide solid electrolytes such as Li 6 PS 5 Cl hold high promise for solid‐state batteries due to their high ionic conductivity; however, their oxidation potential of ~2.5 V is not compatible with high voltage Ni‐rich cathodes such as LiNi x Co y Mn 1−x−y O 2 (x≥0.8). Using guidance from density functional theory, we devise an effective, conformal, and thin coating on the cathode active material, which suppresses the oxidative decomposition of Li 6 PS 5 Cl as shown by experiment. The nanometric coating on nickel‐rich NMC85 enabled capacity retention of 82 % after 200 cycles (2.8–4.3 V vs Li + /Li) using Li 6 PS 5 Cl as the solid electrolyte. In comparison, cells with an uncoated CAM only displayed 56 % capacity retention. The coated‐NCM85 cells also demonstrate much better rate performance and higher capacity. The enhanced performance is due to the formation of a stable amorphous cathode‐electrolyte interphase accruing from the decomposition products of the LiPO 2 F 2 precursor (as predicted by DFT), which protect the sulfide electrolyte from oxidation. The coating fabricated in this cost‐effective process showed superior performance to state‐of‐the‐art coatings such as LiNbO 3 . This work highlights the importance of rationally designing stable coating materials based on their potential decomposition products and confirms the suitability of a low‐cost and conformal coating to enable sulfide electrolyte‐based all‐solid‐state batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemistry and the Waterloo Institute of Nanotechnology, University of Waterloo, 200 University Ave, Waterloo ON, N2L 3G1, Canada.
ORCID-Profile: Linda Nazar
Förderung
- Bar Association of San Francisco
- Natural Sciences and Engineering Research Council of Canada
- Ontario Research Fund
- BASF
Zitieren
APA
Qian, L., Huang, Y., Dean, C., Kochetkov, I., Singh, B., & Nazar, L. (2025). Engineering Stable Decomposition Products on Cathode Surfaces to Enable High Voltage All‐Solid‐State Batteries. Angewandte Chemie International Edition, 64(2). https://doi.org/10.1002/anie.202413591
Vancouver
Qian L, Huang Y, Dean C, Kochetkov I, Singh B, Nazar L. Engineering Stable Decomposition Products on Cathode Surfaces to Enable High Voltage All‐Solid‐State Batteries. Angewandte Chemie International Edition. 2025;64(2). doi:10.1002/anie.202413591
BibTeX
@article{Qian2025,
author = {Qian, Lanting and Huang, Yangyang and Dean, Cameron and Kochetkov, Ivan and Singh, Baltej and Nazar, Linda},
title = {Engineering Stable Decomposition Products on Cathode Surfaces to Enable High Voltage All‐Solid‐State Batteries},
journal = {Angewandte Chemie International Edition},
year = {2025},
volume = {64},
number = {2},
doi = {10.1002/anie.202413591}
}
EUVIMED