Scalable Production of Thin and Durable Practical Li Metal Anode for High‐Energy‐Density Batteries
Angewandte Chemie International Edition · 25.11.2024 · 63 (48)
DOI: 10.1002/anie.202409327 ↗Kurz gefasst
Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 25.10.2024. Verfasst von Shuixin Xia und 10 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials and Chemistry, University of Shanghai for Science and Technology, Shanghai, 200093, China. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Natural Science Foundation of China, Shanghai Rising-Star Program, Natural Science Foundation of Shanghai.
Abstract (Originalsprache)
Utilization of thin Li metal is the ultimate pathway to achieving practical high‐energy‐density Li metal batteries (LMBs), but its practical implementation has been significantly impeded by formidable challenges of poor thinning processability, severe interphase instability and notorious dendritic Li growth. Here we report a practical thin (10–40 μm) Li/Mo/Li 2 Se with concurrently modulated interphase and mechanical properties, achieved via a scalable mechanical rolling process. The in situ generated Li 2 Se and Mo not only enhance the mechanical strength enabling the scalable fabrication of thin Li metal, but also promote homogeneous Li electrodeposition. Significantly, the Li/Mo/Li 2 Se demonstrates ultrahigh‐rate performance (15 mA cm −2 ) and ultralong‐lifespan cycling sustainability (2700 cycles) with exceptional anti‐pulverization capability. The Li|LiFePO 4 cells show substantially prolonged cyclability over 1200 cycles with an ultralow decay rate of ~0.01 % per cycle. Moreover, the Li|LiNi 0.8 Co 0.1 Mn 0.1 O 2 pouch cells deliver enhanced cycling stability even under the extremely harsh conditions of low negative‐to‐positive‐capacity (N/P) ratio of ~1.2 and lean electrolyte of ~0.95 g Ah −1 , showing an exceptional energy density of 329.2 Wh kg −1 . This work sheds light on facile pathway for scalable production of durable thin Li metal anode toward reliable practicability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials and Chemistry, University of Shanghai for Science and Technology, Shanghai, 200093, China.
- School of Chemical Engineering, The University of Adelaide, Adelaide, South Australia, 5005, Australia.
- Logistics Engineering College, Shanghai Maritime University, Shanghai, 201306, China.
- Ganjiang Innovation Academy, Chinese Academy of Sciences, Ganzhou, 341000, China.
ORCID-Profile: Shuixin Xia, Zaiping Guo
Förderung
- National Natural Science Foundation of China
- Shanghai Rising-Star Program
- Natural Science Foundation of Shanghai
- Shanghai Science and Technology Commission
- Australian Research Council
Zitieren
APA
Xia, S., Li, C., Yuwono, J. A., Wang, Y., Wang, C., Li, M., Zhang, X., Yang, J., Mao, J., Zheng, S., & Guo, Z. (2024). Scalable Production of Thin and Durable Practical Li Metal Anode for High‐Energy‐Density Batteries. Angewandte Chemie International Edition, 63(48). https://doi.org/10.1002/anie.202409327
Vancouver
Xia S, Li C, Yuwono JA, Wang Y, Wang C, Li M, et al. Scalable Production of Thin and Durable Practical Li Metal Anode for High‐Energy‐Density Batteries. Angewandte Chemie International Edition. 2024;63(48). doi:10.1002/anie.202409327
BibTeX
@article{Xia2024,
author = {Xia, Shuixin and Li, Chenrui and Yuwono, Jodie A and Wang, Yuehua and Wang, Cheng and Li, Mingnan and Zhang, Xun and Yang, Junhe and Mao, Jianfeng and Zheng, Shiyou and Guo, Zaiping},
title = {Scalable Production of Thin and Durable Practical Li Metal Anode for High‐Energy‐Density Batteries},
journal = {Angewandte Chemie International Edition},
year = {2024},
volume = {63},
number = {48},
doi = {10.1002/anie.202409327}
}
EUVIMED