EUVIMEDEUVIMED entdecken
Crossref

Zwitterionic Cellulose‐Based Polymer Electrolyte Enabled by Aqueous Solution Casting for High‐Performance Solid‐State Batteries

Yong Cheng iD, Zhichao Cai, Jinglei Xu, Zhefei Sun, Xiaoyu Wu, Jiajia Han, Yao-Hui Wang iD, Ming-Sheng Wang

Angewandte Chemie International Edition · 22.07.2024 · 63 (30)

DOI: 10.1002/anie.202400477 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 17.06.2024. Verfasst von Yong Cheng und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Materials, Xiamen University, Xiamen, 361005, China. Die Arbeit wurde bisher 140-mal zitiert (Crossref) und nennt 59 Literaturangaben. Gefördert von: National Natural Science Foundation of China, the Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyethylene oxide (PEO)‐based solid‐state batteries hold great promise as the next‐generation batteries with high energy density and high safety. However, PEO‐based electrolytes encounter certain limitations, including inferior ionic conductivity, low Li + transference number, and poor mechanical strength. Herein, we aim to simultaneously address these issues by utilizing one‐dimensional zwitterionic cellulose nanofiber (ZCNF) as fillers for PEO‐based electrolytes using a simple aqueous solution casting method. Multiple characterizations and theoretical calculations demonstrate that the unique zwitterionic structure imparts ZCNF with various functions, such as disrupting PEO crystallization, dissociating lithium salts, anchoring anions through cationic groups, accelerating Li + migration by anionic groups, as well as its inherent reinforcement effect. As a result, the prepared PL‐ZCNF electrolyte exhibits remarkable ionic conductivity (5.37×10 −4 S cm −1 ) and Li + transference number (0.62) at 60 °C without sacrificing mechanical strength (9.2 MPa), together with high critical current density of 1.1 mA cm −2 . Attributed to these merits of PL‐ZCNF, the LiFePO 4 |PL‐ZCNF|Li solid‐state full‐cell delivers exceptional rate capability and cycling performance (900 cycles at 5 C). Notably, the assembled pouch‐cell can maintain steady operation over 1000 cycles with an impressive 93.7 % capacity retention at 0.5 C and 60 °C, highlighting the great potential of PL‐ZCNF for practical applications.

Schlagwörter

Stichwörter der Autor:innen

Li+ ConductivityMechanical StrengthSolid-state BatteriesSolid-state Polymer ElectrolyteZwitterionic Cellulose

Autor:innen und Institutionen

  • State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Materials, Xiamen University, Xiamen, 361005, China.

ORCID-Profile: Yong Cheng, Yao-Hui Wang

Förderung

  • National Natural Science Foundation of China
  • the Fundamental Research Funds for the Central Universities

Zitieren

APA

Cheng, Y., Cai, Z., Xu, J., Sun, Z., Wu, X., Han, J., Wang, Y. H., & Wang, M. S. (2024). Zwitterionic Cellulose‐Based Polymer Electrolyte Enabled by Aqueous Solution Casting for High‐Performance Solid‐State Batteries. Angewandte Chemie International Edition, 63(30). https://doi.org/10.1002/anie.202400477

Vancouver

Cheng Y, Cai Z, Xu J, Sun Z, Wu X, Han J, et al. Zwitterionic Cellulose‐Based Polymer Electrolyte Enabled by Aqueous Solution Casting for High‐Performance Solid‐State Batteries. Angewandte Chemie International Edition. 2024;63(30). doi:10.1002/anie.202400477

BibTeX
@article{Cheng2024,
  author = {Cheng, Yong and Cai, Zhichao and Xu, Jinglei and Sun, Zhefei and Wu, Xiaoyu and Han, Jiajia and Wang, Yao-Hui and Wang, Ming-Sheng},
  title = {Zwitterionic Cellulose‐Based Polymer Electrolyte Enabled by Aqueous Solution Casting for High‐Performance Solid‐State Batteries},
  journal = {Angewandte Chemie International Edition},
  year = {2024},
  volume = {63},
  number = {30},
  doi = {10.1002/anie.202400477}
}
Kostenlos starten →