Dicarboxylic Acid‐Assisted Surface Oxide Removal and Passivation of Indium Antimonide Colloidal Quantum Dots for Short‐Wave Infrared Photodetectors
Angewandte Chemie International Edition · 19.02.2024 · 63 (8)
DOI: 10.1002/anie.202316733 ↗Kurz gefasst
Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 16.01.2024. Verfasst von Yangning Zhang und 16 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical and Computer Engineering, University of Toronto, 10 King's College Road, M5S 3G4, Toronto, Ontario, Canada. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, Canada Research Chairs.
Abstract (Originalsprache)
Heavy‐metal‐free III–V colloidal quantum dots (CQDs) are promising materials for solution‐processed short‐wave infrared (SWIR) photodetectors. Recent progress in the synthesis of indium antimonide (InSb) CQDs with sizes smaller than the Bohr exciton radius enables quantum‐size effect tuning of the band gap. However, it has been challenging to achieve uniform InSb CQDs with band gaps below 0.9 eV, as well as to control the surface chemistry of these large‐diameter CQDs. This has, to date, limited the development of InSb CQD photodetectors that are sensitive to 1400 nm light. Here we adopt solvent engineering to facilitate a diffusion‐limited growth regime, leading to uniform CQDs with a band gap of 0.89 eV. We then develop a CQD surface reconstruction strategy that employs a dicarboxylic acid to selectively remove the native In/Sb oxides, and enables a carboxylate‐halide co‐passivation with the subsequent halide ligand exchange. We find that this strategy reduces trap density by half compared to controls, and enables electronic coupling among CQDs. Photodetectors made using the tailored CQDs achieve an external quantum efficiency of 25 % at 1400 nm, the highest among III–V CQD photodetectors in this spectral region.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Electrical and Computer Engineering, University of Toronto, 10 King's College Road, M5S 3G4, Toronto, Ontario, Canada.
- Department of Materials Science and Engineering, School of Molecular Science and Engineering, Vidyasirimedhi Institute of Science and Technology, 21210, Rayong, Thailand.
- Department of Physical and Environmental Sciences, University of Toronto (Scarborough), 1065 Military Trail, M1C 1A4, Toronto, Ontario, Canada.
ORCID-Profile: Yangning Zhang, Pan Xia, Darshan H Parmar, Edward H Sargent
Förderung
- Natural Sciences and Engineering Research Council of Canada
- Canada Research Chairs
Zitieren
APA
Zhang, Y., Xia, P., Rehl, B., Parmar, D. H., Choi, D., Imran, M., Chen, Y., Liu, Y., Vafaie, M., Li, C., Atan, O., Pina, J. M., Paritmongkol, W., Levina, L., Voznyy, O., Hoogland, S., & Sargent, E. H. (2024). Dicarboxylic Acid‐Assisted Surface Oxide Removal and Passivation of Indium Antimonide Colloidal Quantum Dots for Short‐Wave Infrared Photodetectors. Angewandte Chemie International Edition, 63(8). https://doi.org/10.1002/anie.202316733
Vancouver
Zhang Y, Xia P, Rehl B, Parmar DH, Choi D, Imran M, et al. Dicarboxylic Acid‐Assisted Surface Oxide Removal and Passivation of Indium Antimonide Colloidal Quantum Dots for Short‐Wave Infrared Photodetectors. Angewandte Chemie International Edition. 2024;63(8). doi:10.1002/anie.202316733
BibTeX
@article{Zhang2024,
author = {Zhang, Yangning and Xia, Pan and Rehl, Benjamin and Parmar, Darshan H and Choi, Dongsun and Imran, Muhammad and Chen, Yiqing and Liu, Yanjiang and Vafaie, Maral and Li, Chongwen and Atan, Ozan and Pina, Joao M and Paritmongkol, Watcharaphol and Levina, Larissa and Voznyy, Oleksandr and Hoogland, Sjoerd and Sargent, Edward H},
title = {Dicarboxylic Acid‐Assisted Surface Oxide Removal and Passivation of Indium Antimonide Colloidal Quantum Dots for Short‐Wave Infrared Photodetectors},
journal = {Angewandte Chemie International Edition},
year = {2024},
volume = {63},
number = {8},
doi = {10.1002/anie.202316733}
}
EUVIMED