EUVIMEDEUVIMED entdecken
Crossref

Compatible Dynamically Wetting Electrolyte–Electrode Interface Design for Solid‐State Lithium–Sulfur Batteries

Wanyuan Jiang, Danhui Wang, Borui Li, Yunpeng Qu, Shuo Zhuo, Naiwen Hu, Wenkai Song, Lin Wang, Xigao Jian iD, Fangyuan Hu iD

Angewandte Chemie International Edition · 01.07.2026 · 65 (27)

DOI: 10.1002/anie.1261984 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 11.05.2026. Verfasst von Wanyuan Jiang und 9 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Fine Chemicals, Frontiers Science Center For Smart Materials Oriented Chemical Engineering, School of Chemical Engineering, T…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 58 Literaturangaben. Gefördert von: Scientific Research Innovation Capability Support Project for Young Faculty, National Outstanding Youth Science Fund, CNPC Innovation Found.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid‐state lithium–sulfur batteries feature high energy density and stability, but their practical application is constrained by limited ion transport at the electrode/solid‐state electrolyte interfaces and safety concerns arising from Li dendrites. This study presents a solid polymer electrolyte (SPSLL) constructed from an ultrathin flame‐retardant sulfonated copolymer (phthalazinone biphenylether sulfone) skeleton, into which a mixed phase of poly(vinylidene fluoride‐co‐hexafluoropropylene), succinonitrile, and lithium bis(trifluoromethanesulfonyl)imide is incorporated, together with a liquid metal interfacial wetting phase. This design enables a dynamic wetting mechanism that facilitates the formation of compatible electrolyte‐electrode interfaces. Through its sulfonated polymer skeleton, SPSLL promotes lithium salt dissociation and enhances thermal stability. Simultaneously, the LM serves as dynamic active sites, both strengthening interfacial physical contact and facilitating the formation of alloyed solid electrolyte interphases. As a result, the SPSLL‐based solid‐state Li‐sulfurized polyacrylonitrile (Li||SPAN) battery exhibits excellent cycling stability, maintaining a capacity retention of 92.2% and a Coulombic efficiency of 99.9% after 500 cycles. Furthermore, the SPSLL single‐layer pouch cell has an initial specific capacity of 948 mAh g −1 . The dynamic wetting strategy presented in this work offers a promising research direction for interface design in solid‐state batteries.

Schlagwörter

Stichwörter der Autor:innen

charge carrier transportdynamic wetting mechanismreversible alloyingsolid polymer electrolytessolid–electrolyte interphase

Autor:innen und Institutionen

  • State Key Laboratory of Fine Chemicals, Frontiers Science Center For Smart Materials Oriented Chemical Engineering, School of Chemical Engineering, Technology Innovation Center of High Performance Resin Materials (Liaon…
  • School of Materials Science and Engineering, State Key Laboratory of Fine Chemicals. Frontiers Science Center for Smart Materials Oriented Chemical Engineering, Technology Innovation Center of High Performance Resin Mat…

ORCID-Profile: Xigao Jian, Fangyuan Hu

Förderung

  • Scientific Research Innovation Capability Support Project for Young Faculty
  • National Outstanding Youth Science Fund
  • CNPC Innovation Found
  • Dalian Outstanding Youth Science and Technology Talent Project
  • Dalian Science and Technology Innovation Project

Zitieren

APA

Jiang, W., Wang, D., Li, B., Qu, Y., Zhuo, S., Hu, N., Song, W., Wang, L., Jian, X., & Hu, F. (2026). Compatible Dynamically Wetting Electrolyte–Electrode Interface Design for Solid‐State Lithium–Sulfur Batteries. Angewandte Chemie International Edition, 65(27). https://doi.org/10.1002/anie.1261984

Vancouver

Jiang W, Wang D, Li B, Qu Y, Zhuo S, Hu N, et al. Compatible Dynamically Wetting Electrolyte–Electrode Interface Design for Solid‐State Lithium–Sulfur Batteries. Angewandte Chemie International Edition. 2026;65(27). doi:10.1002/anie.1261984

BibTeX
@article{Jiang2026,
  author = {Jiang, Wanyuan and Wang, Danhui and Li, Borui and Qu, Yunpeng and Zhuo, Shuo and Hu, Naiwen and Song, Wenkai and Wang, Lin and Jian, Xigao and Hu, Fangyuan},
  title = {Compatible Dynamically Wetting Electrolyte–Electrode Interface Design for Solid‐State Lithium–Sulfur Batteries},
  journal = {Angewandte Chemie International Edition},
  year = {2026},
  volume = {65},
  number = {27},
  doi = {10.1002/anie.1261984}
}
Kostenlos starten →