EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Adaptive Trajectory of the Normal Force Vector in the Polishing of Curved Surface Component Robots

Jiale Xu, Haibin Huang, Hui Long, Shijing Lei

Advanced Intelligent Systems · 2025-11 · 7 (11)

DOI: 10.1002/aisy.202401044 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Intelligent Systems, online erschienen am 07.07.2025. Verfasst von Jiale Xu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Fujian Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to address the adaptive control of the normal polishing force vector during the robotic polishing of curved elements, this paper develops a polishing compliance control system for industrial robots. The row cutting method is employed to achieve the initial planning of the polishing trajectory, while an adaptive control method is implemented to regulate the polishing force. A learning algorithm based on a neural network was proposed. Combined with experimental and analytical methods, a model establishing the relationship between the normal declination angle of the surface element and the force exerted by the end tool is developed. The average prediction error of the model is 0.254°, with a maximum error of 0.6°. The robot's end effector orientation is adjusted in real time to ensure that the polishing tool's normal force direction adaptively followed the surface element's normal direction. Three sets of polishing experiments are conducted, including nonadaptive force, adaptive normal force, and adaptive normal force with normal following. The results indicated sequential improvements in surface roughness and quality, demonstrating the system's efficacy in meeting the polishing requirements for curved elements.

Förderung

  • Natural Science Foundation of Fujian Province

Zitieren

APA

Xu, J., Huang, H., Long, H., & Lei, S. (2025). The Adaptive Trajectory of the Normal Force Vector in the Polishing of Curved Surface Component Robots. Advanced Intelligent Systems, 7(11). https://doi.org/10.1002/aisy.202401044

Vancouver

Xu J, Huang H, Long H, Lei S. The Adaptive Trajectory of the Normal Force Vector in the Polishing of Curved Surface Component Robots. Advanced Intelligent Systems. 2025;7(11). doi:10.1002/aisy.202401044

BibTeX
@article{Xu2025,
  author = {Xu, Jiale and Huang, Haibin and Long, Hui and Lei, Shijing},
  title = {The Adaptive Trajectory of the Normal Force Vector in the Polishing of Curved Surface Component Robots},
  journal = {Advanced Intelligent Systems},
  year = {2025},
  volume = {7},
  number = {11},
  doi = {10.1002/aisy.202401044}
}
Kostenlos starten →