EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Picotaur: A 15 mg Hexapedal Robot with Electrostatically Driven, 3D‐Printed Legs

Sukjun Kim, Aaron M. Johnson, Sarah Bergbreiter

Advanced Intelligent Systems · 2024-10 · 6 (10)

DOI: 10.1002/aisy.202400196 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Intelligent Systems, online erschienen am 27.06.2024. Verfasst von Sukjun Kim und 2 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Carnegie Mellon University, U.S. Air Force.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dynamic and agile locomotion in legged robots enables them to overcome obstacles and navigate complex and unstructured terrain. However, the leg mechanisms and actuators needed for versatile locomotion are much more challenging to manufacture and integrate in sub‐gram scale robots. Herein, Picotaur, a 15.4 mg hexapedal robot with legs that enable various locomotion tasks such as turning, climbing 3D‐printed stairs, and pushing loads for the first time at these size scales, is presented. 3D printing with two‐photon polymerization enables the manufacture of electrostatically driven 2 degrees of freedom legs on a robot body made from a flexible printed circuit board. Based on simple control inputs, Picotaur can achieve alternating tripod gaits, reaching speeds up to 57 mm (7.2 body lengths) per second, as well as pronking gaits to tackle a wider variety of terrain. This approach to manufacturing and controlling legged robots at smaller scales provides a path forward toward robots that can be used for practical applications ranging from inspection to exploration and rival the performance of insects at similar size scales.

Förderung

  • Carnegie Mellon University
  • U.S. Air Force

Zitieren

APA

Kim, S., Johnson, A. M., & Bergbreiter, S. (2024). Picotaur: A 15 mg Hexapedal Robot with Electrostatically Driven, 3D‐Printed Legs. Advanced Intelligent Systems, 6(10). https://doi.org/10.1002/aisy.202400196

Vancouver

Kim S, Johnson AM, Bergbreiter S. Picotaur: A 15 mg Hexapedal Robot with Electrostatically Driven, 3D‐Printed Legs. Advanced Intelligent Systems. 2024;6(10). doi:10.1002/aisy.202400196

BibTeX
@article{Kim2024,
  author = {Kim, Sukjun and Johnson, Aaron M. and Bergbreiter, Sarah},
  title = {Picotaur: A 15 mg Hexapedal Robot with Electrostatically Driven, 3D‐Printed Legs},
  journal = {Advanced Intelligent Systems},
  year = {2024},
  volume = {6},
  number = {10},
  doi = {10.1002/aisy.202400196}
}
Kostenlos starten →