From Spent Graphite to Battery‐Grade Anode Material Through High‐Temperature Regeneration
Advanced Energy and Sustainability Research · 2026-10 · 7 (10)
DOI: 10.1002/aesr.70285 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy and Sustainability Research, online erschienen am 06.10.2026. Verfasst von Felix Frobart und 2 weiteren Autor:innen. Die Arbeit nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Wirtschaft und Energie.
Abstract (Originalsprache)
The recovery of graphite from end‐of‐life lithium‐ion batteries is essential for establishing circular battery value chains, yet graphite contained in industrial black mass streams remains largely underutilized due to contamination and structural degradation. This study demonstrates the direct regeneration of high‐performance graphite from realistic recycling feedstocks without dedicated purification steps. High‐temperature treatment under an inert atmosphere (2000–3000 °C) increases graphite purity from 92.0% to 99.9%, while simultaneously inducing defect healing and restoring graphitic order. Raman spectroscopy, X‐ray diffraction, specific surface area, and chemical analysis reveal that impurity removal and structural reconstruction are temperature‐dependent processes that emerge only above 2000 °C. In contrast, lower treatment temperatures (≤1500 °C) result in neither effective purification nor significant structural recovery. A treatment temperature of 2700 °C provides an effective balance between material quality and energy demand. The regenerated graphites deliver reversible capacities of up to 350 mAh g −1 and initial Coulombic efficiencies of 94.0%, while an additional amorphous carbon coating further enhances rate performance. These results establish a mechanistic link between impurity removal, graphitic reconstruction, and electrochemical behavior, demonstrating a practical route for converting highly contaminated graphite waste into high‐performance anode materials and opening a pathway toward industrial‐scale graphite circularity.
Förderung
- Bundesministerium für Wirtschaft und Energie
Zitieren
APA
Frobart, F., Michalowski, P., & Kwade, A. (2026). From Spent Graphite to Battery‐Grade Anode Material Through High‐Temperature Regeneration. Advanced Energy and Sustainability Research, 7(10). https://doi.org/10.1002/aesr.70285
Vancouver
Frobart F, Michalowski P, Kwade A. From Spent Graphite to Battery‐Grade Anode Material Through High‐Temperature Regeneration. Advanced Energy and Sustainability Research. 2026;7(10). doi:10.1002/aesr.70285
BibTeX
@article{Frobart2026,
author = {Frobart, Felix and Michalowski, Peter and Kwade, Arno},
title = {From Spent Graphite to Battery‐Grade Anode Material Through High‐Temperature Regeneration},
journal = {Advanced Energy and Sustainability Research},
year = {2026},
volume = {7},
number = {10},
doi = {10.1002/aesr.70285}
}
EUVIMED