EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advanced Manufacturing of Flexible and Sustainable Triboelectric Nanogenerators Using Waste Materials for Energy Harvesting and Sensing Applications

Ans Al Rashid, Arshad Khan, Arshad Hassan, Amine Bermak, Muammer Koç

Advanced Energy and Sustainability Research · 2026-04 · 7 (4)

DOI: 10.1002/aesr.70191 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy and Sustainability Research, online erschienen am 24.04.2026. Verfasst von Ans Al Rashid und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Growing interest in sustainable materials has led to increased efforts to investigate waste‐derived triboelectric nanogenerators (TENGs), using discarded materials such as plastics, agro‐residues, and textiles as tribo‐layers to transform waste into functional energy harvesters. In this study, we present a flexible and sustainable TENG fabricated through upcycling of waste materials and 3D printing (3DP). Discarded polyethylene terephthalate (PET) plastic bottles were recycled into 3D‐printed tribo‐positive layers, and graphite from discarded batteries was recovered as a conductive ink for the electrode. Polydimethylsiloxane (PDMS) was used as a tribo‐negative layer to produce ReWearSense TENG, which delivered high electrical outputs, including an open‐circuit voltage of up to ≈130.8 V and a short‐circuit current of up to ≈112 μA, with a peak power density of 33.84 μW/cm 2 at 700 kΩ load. ReWearSense TENG exhibited excellent durability, sustaining 10,000 cyclic loadings without performance degradation. Practical utility was demonstrated by charging capacitors (1–33 μF) via a rectified output, attaining sufficient stored energy to drive low‐power electronics. Outcomes of this study underscore a sustainable route for energy harvesting and self‐powered sensing by synergistically integrating recycled polymers, e‐waste carbon electrodes, and 3DP to transform selected waste streams into functional energy harvesters with circular‐materials integration.

Zitieren

APA

Rashid, A. A., Khan, A., Hassan, A., Bermak, A., & Koç, M. (2026). Advanced Manufacturing of Flexible and Sustainable Triboelectric Nanogenerators Using Waste Materials for Energy Harvesting and Sensing Applications. Advanced Energy and Sustainability Research, 7(4). https://doi.org/10.1002/aesr.70191

Vancouver

Rashid AA, Khan A, Hassan A, Bermak A, Koç M. Advanced Manufacturing of Flexible and Sustainable Triboelectric Nanogenerators Using Waste Materials for Energy Harvesting and Sensing Applications. Advanced Energy and Sustainability Research. 2026;7(4). doi:10.1002/aesr.70191

BibTeX
@article{Rashid2026,
  author = {Rashid, Ans Al and Khan, Arshad and Hassan, Arshad and Bermak, Amine and Koç, Muammer},
  title = {Advanced Manufacturing of Flexible and Sustainable Triboelectric Nanogenerators Using Waste Materials for Energy Harvesting and Sensing Applications},
  journal = {Advanced Energy and Sustainability Research},
  year = {2026},
  volume = {7},
  number = {4},
  doi = {10.1002/aesr.70191}
}
Kostenlos starten →