Incorporating Ethylene Oxide Functionalized Inorganic Particles to Solid Polymer Electrolytes for Enhanced Mechanical Stability and Electrochemical Performance
Advanced Energy and Sustainability Research · 2023-03 · 4 (3)
DOI: 10.1002/aesr.202200125 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy and Sustainability Research, online erschienen am 22.01.2023. Verfasst von Hyo Won Bae und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, National Research Foundation of Korea.
Abstract (Originalsprache)
Solid‐state batteries based on polymer electrolytes attract increasing interest owing to their high feasibility of roll‐to‐roll mass production. However, the mechanical strength of polymer electrolytes is not sufficient to suppress the formation of lithium dendrites, leading to early capacity fading. Many researchers have attempted to reinforce polymer electrolytes by adding inorganic particles, but insufficient compatibility between the particles and electrolytes can cause particles to agglomerate, deteriorating the mechanical stability of the resulting hybrid electrolytes. Herein, surface‐functionalized inorganic particles are used to prepare hybrid polymer electrolytes (HPEs). The surface of aluminum oxide (Al 2 O 3 ) nanoparticles is chemically modified by an organic material containing an ethylene oxide (EO) group. The EO group on the functionalized Al 2 O 3 (F‐Al 2 O 3 ) enables uniform dispersion of the nanoparticles in the EO polymer electrolytes and improves the ionic conductivity and electrochemical stability. The nanoindentation measurements show that the hybrid polymer electrolytes with F‐Al 2 O 3 (HPE‐F‐Al 2 O 3 ) have enhanced stiffness. The electrochemical stability and ionic conductivity of the polymer electrolytes also benefit from incorporating F‐Al 2 O 3 . As a result, a lithium polymer battery with Li anode, LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) cathode, and HPE‐F‐Al 2 O 3 electrolyte demonstrates stable long‐term cycling with a capacity retention of up to 87% over 100 cycles.
Förderung
- Ministry of Trade, Industry and Energy
- National Research Foundation of Korea
Zitieren
APA
Bae, H. W., Suk, J., Park, H. S., & Kim, D. W. (2023). Incorporating Ethylene Oxide Functionalized Inorganic Particles to Solid Polymer Electrolytes for Enhanced Mechanical Stability and Electrochemical Performance. Advanced Energy and Sustainability Research, 4(3). https://doi.org/10.1002/aesr.202200125
Vancouver
Bae HW, Suk J, Park HS, Kim DW. Incorporating Ethylene Oxide Functionalized Inorganic Particles to Solid Polymer Electrolytes for Enhanced Mechanical Stability and Electrochemical Performance. Advanced Energy and Sustainability Research. 2023;4(3). doi:10.1002/aesr.202200125
BibTeX
@article{Bae2023,
author = {Bae, Hyo Won and Suk, Jungdon and Park, Ho Seok and Kim, Dong Wook},
title = {Incorporating Ethylene Oxide Functionalized Inorganic Particles to Solid Polymer Electrolytes for Enhanced Mechanical Stability and Electrochemical Performance},
journal = {Advanced Energy and Sustainability Research},
year = {2023},
volume = {4},
number = {3},
doi = {10.1002/aesr.202200125}
}
EUVIMED