EUVIMEDEUVIMED entdecken
Crossref

Relay Catalysis on Phase‐Separated Janus–CuCo Alloys for Efficient Electrochemical Nitrate Reduction at Industrial Low Concentration

Mazhar Hayat, Enyang Sun, Min Wang, Qamir Iqbal, Wenwen Zhou, Yan Yan, Minghui He, Yu‐Cheng Huang, Yujuan Zhang, Yi Fu, Muhammad Akmal, Ying‐Rui Lu und 6 weitere

Advanced Energy Materials · 04.11.2026

DOI: 10.1002/aenm.71797 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 04.11.2026. Verfasst von Mazhar Hayat und 17 weiteren Autor:innen. Die Arbeit nennt 70 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Shanxi Provincial Key Research and Development Project, National Science and Technology Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Earth‐abundant Cu and Co are attractive electrocatalysts for nitrate reduction to ammonia (NO 3 − RR); however, conventional solid‐solution alloys with single‐phase active sites lack effective intermediate spillover, impeding the hydrogenation of multiple reaction intermediates and limiting NH 3 selectivity under dilute nitrate conditions. Here we report phase‐separated yet electronically coupled Janus–CuCo alloys synthesized via a time–charge regulated electrochemical reduction strategy, forming metallic Cu/Co domains with a well‐defined interphase electronic structure. This Janus architecture enables relay catalysis, in which Cu domains activate NO 3 − , intermediates migrate to Cu−Co interfaces for hydrogenation, and adjacent Co domains promote subsequent NH 3 formation. In situ characterizations reveal pronounced Cu–Co synergy, where Co sites regulate *H‐mediated hydrogenation while the balanced surface coverage of *H and *NO 3 − optimizes NH 3 selectivity and yield. Consequently, the optimized Janus Cu−Co catalyst, Janus–Cu 70 Co 30 /NOMC, achieves a peak NH 3 Faradaic efficiency (FE NH3 ) of 95.5% at −500 mA cm −2 and delivers a FE NH3 of 93.1% with an NH 3 yield rate of 4.2 mg h −1 mg cat −1 at −0.4 V vs RHE in an MEA flow cell under low nitrate concentrations. These findings establish phase separation with electronic coupling, enabled by electrochemical time–charge control, as an effective design principle for efficient multistep NO 3 − RR electrocatalysis.

Förderung

  • National Natural Science Foundation of China
  • Shanxi Provincial Key Research and Development Project
  • National Science and Technology Council
  • Natural Science Foundation of Shandong Province
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Hayat, M., Sun, E., Wang, M., Iqbal, Q., Zhou, W., Yan, Y., He, M., Huang, Y., Zhang, Y., Fu, Y., Akmal, M., Lu, Y., Hu, T., Lu, Y., Ding, Y., Chen, H., Li, S., & Li, Y. (2026). Relay Catalysis on Phase‐Separated Janus–CuCo Alloys for Efficient Electrochemical Nitrate Reduction at Industrial Low Concentration. Advanced Energy Materials. https://doi.org/10.1002/aenm.71797

Vancouver

Hayat M, Sun E, Wang M, Iqbal Q, Zhou W, Yan Y, et al. Relay Catalysis on Phase‐Separated Janus–CuCo Alloys for Efficient Electrochemical Nitrate Reduction at Industrial Low Concentration. Advanced Energy Materials. 2026. doi:10.1002/aenm.71797

BibTeX
@article{Hayat2026,
  author = {Hayat, Mazhar and Sun, Enyang and Wang, Min and Iqbal, Qamir and Zhou, Wenwen and Yan, Yan and He, Minghui and Huang, Yu‐Cheng and Zhang, Yujuan and Fu, Yi and Akmal, Muhammad and Lu, Ying‐Rui and Hu, Tuoping and Lu, Yuxuan and Ding, Yu and Chen, Huili and Li, Siming and Li, Yawei},
  title = {Relay Catalysis on Phase‐Separated Janus–CuCo Alloys for Efficient Electrochemical Nitrate Reduction at Industrial Low Concentration},
  journal = {Advanced Energy Materials},
  year = {2026},
  doi = {10.1002/aenm.71797}
}
Kostenlos starten →