EUVIMEDEUVIMED entdecken
Crossref

Clean Tin Oxide via Volatile Additive Engineering for High‐performance Perovskite Photovoltaics

Xin Wang, Ziang Pan, Jingyao Feng, Lifei Chen, Yuchen Song, Wenkai Liao, Peng Huang, Yifan Li, Jianguang Xu, Feng Wang, Xiaoming Zhao

Advanced Energy Materials · 2026-10 · 16 (38)

DOI: 10.1002/aenm.71514 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 30.08.2026. Verfasst von Xin Wang und 10 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Science and Technology Commission of Shanghai Municipality, Vetenskapsrådet.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

SnO 2 is a benchmark electron transport material for perovskite solar cells (PSCs). However, SnO 2 films from the conventional chemical bath deposition (CBD) are limited by impurities and defects that accelerate non‐radiative recombination and compromise device stability. Here, we present a volatile additive engineering strategy using pyruvic acid (PA) as a dual‐functional nucleation promoter and surface modulator during SnO 2 deposition. Owing to its volatility (sublimation at 145°C), PA can be effectively removed during annealing, resulting in cleaner SnO 2 surfaces with reduced residual groups. This is accompanied by a decrease in oxygen‐related defect densities in the SnO 2 layer. This improvement leads to enhanced charge recombination and improved thermal stability at the buried interface. Consequently, PA‐engineered PSCs achieve a power conversion efficiency of 26.17%, together with improved device stability, retaining >80% of their initial efficiency after 900 h of continuous operation, 1000 h at 65°C, and 30 days under 30% relative humidity. Furthermore, this approach is compatible with large‐area fabrication, yielding efficiencies of 24.83% for 1 cm 2 lab‐scale cells and 20.21% for 30 cm × 30 cm industrial‐scale solar modules. These results suggest that controlling additive volatility improves CBD‐SnO 2 quality and offers a promising route for stable, scalable perovskite solar cells.

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Commission of Shanghai Municipality
  • Vetenskapsrådet

Zitieren

APA

Wang, X., Pan, Z., Feng, J., Chen, L., Song, Y., Liao, W., Huang, P., Li, Y., Xu, J., Wang, F., & Zhao, X. (2026). Clean Tin Oxide via Volatile Additive Engineering for High‐performance Perovskite Photovoltaics. Advanced Energy Materials, 16(38). https://doi.org/10.1002/aenm.71514

Vancouver

Wang X, Pan Z, Feng J, Chen L, Song Y, Liao W, et al. Clean Tin Oxide via Volatile Additive Engineering for High‐performance Perovskite Photovoltaics. Advanced Energy Materials. 2026;16(38). doi:10.1002/aenm.71514

BibTeX
@article{Wang2026,
  author = {Wang, Xin and Pan, Ziang and Feng, Jingyao and Chen, Lifei and Song, Yuchen and Liao, Wenkai and Huang, Peng and Li, Yifan and Xu, Jianguang and Wang, Feng and Zhao, Xiaoming},
  title = {Clean Tin Oxide via Volatile Additive Engineering for High‐performance Perovskite Photovoltaics},
  journal = {Advanced Energy Materials},
  year = {2026},
  volume = {16},
  number = {38},
  doi = {10.1002/aenm.71514}
}
Kostenlos starten →