Atomically Dispersed Mo–S Sites Boost NiFe–Layered Double Hydroxide for Industrial‐Level Seawater Electrolysis
Advanced Energy Materials · 2026-08 · 16 (32)
DOI: 10.1002/aenm.71277 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 10.07.2026. Verfasst von Jae Kwan Lee und 14 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Science and ICT, South Korea, Korea Research Institute of Standards and Science.
Abstract (Originalsprache)
Seawater electrolysis has emerged as a promising pathway for sustainable hydrogen production. However, practical seawater electrolysis is hindered by Cl − ‐induced site blocking, corrosion, and competitive chlorine evolution. Thus electrocatalysts must achieve high OER currents below the chlorine evolution onset while maintaining structural and chemical stability in Cl − ‐rich environments. Although noble‐metal‐free NiFe–layered double hydroxide (LDH) is a promising catalyst for oxygen evolution reaction (OER), its practical application in seawater electrolysis remains limited due to its relatively higher overpotentials and Cl − ‐vulnerability. To overcome this challenge, we report a (Mo–S) 1 @NiFe–LDH, which incorporates atomically dispersed Mo–S sites within the NiFe–LDH lattice. Spectroscopic analyses confirm that the unique Mo–S coordination induces structural relaxation, lowering the energetic barrier for the transition to active (oxy)hydroxide (NiFeOOH) phase. This facilitated reconstruction enhances reaction kinetics at reduced potential. In a practical seawater anion exchange membrane water electrolyzer (AEMWE), (Mo–S) 1 @NiFe–LDH exhibits an industrial‐level current density of 5.29 A cm −2 at 1.8 V. Furthermore, the system demonstrates stable operation for 425 h under alkalized seawater conditions. This work establishes a design principle for seawater‐resilient catalysts by integrating atomic‐scale coordination with high‐current‐density stability for large‐scale energy conversion.
Förderung
- National Research Foundation of Korea
- Ministry of Science and ICT, South Korea
- Korea Research Institute of Standards and Science
Zitieren
APA
Lee, J. K., Kim, J., Cho, B., Hwang, I., Cheon, W. S., Lim, J., Hong, K., Kim, H. G., Lim, J. H., Lee, S., Kang, J. H., Kwon, M. S., Kwon, K. C., Park, S. H., & Jang, H. W. (2026). Atomically Dispersed Mo–S Sites Boost NiFe–Layered Double Hydroxide for Industrial‐Level Seawater Electrolysis. Advanced Energy Materials, 16(32). https://doi.org/10.1002/aenm.71277
Vancouver
Lee JK, Kim J, Cho B, Hwang I, Cheon WS, Lim J, et al. Atomically Dispersed Mo–S Sites Boost NiFe–Layered Double Hydroxide for Industrial‐Level Seawater Electrolysis. Advanced Energy Materials. 2026;16(32). doi:10.1002/aenm.71277
BibTeX
@article{Lee2026,
author = {Lee, Jae Kwan and Kim, Jaehyun and Cho, Byeong‐Gwan and Hwang, In‐Hui and Cheon, Woo Seok and Lim, Jiheon and Hong, Kiryong and Kim, Hong Gi and Lim, Jong Hwan and Lee, Sooheyong and Kang, Jong Hun and Kwon, Min Sang and Kwon, Ki Chang and Park, Sun Hwa and Jang, Ho Won},
title = {Atomically Dispersed Mo–S Sites Boost NiFe–Layered Double Hydroxide for Industrial‐Level Seawater Electrolysis},
journal = {Advanced Energy Materials},
year = {2026},
volume = {16},
number = {32},
doi = {10.1002/aenm.71277}
}
EUVIMED