EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modulation of Local Environment for Selective Bicarbonate Conversion to Multi‐Carbon Products

Tai Nguyen, Anh N. Nguyen, Guorui Gao, Jackson Crane, Thành Trần‐Phú, Gelson Tavares da Silva, Aldo Gonzalez‐Lopez, Hung Lai, Khac Huy Dinh, Duc‐Minh Phan‐Pham, Martin Guay, Carlos Escobedo und 4 weitere

Advanced Energy Materials · 24.06.2026

DOI: 10.1002/aenm.71214 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 24.06.2026. Verfasst von Tai Nguyen und 15 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, Queen's University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Renewable electricity‐powered direct electrosynthesis of multi‐carbon (C 2+ ) products such as ethylene (C 2 H 4 ) from bicarbonate offers a sustainable route for carbon dioxide (CO 2 ) utilization but is hindered by limited CO 2 availability and unfavorable reaction environments. Existing approaches, such as electrolyte engineering and buffering layers, often improve selectivity at the cost of higher full‐cell voltages, creating a trade‐off between selectivity and energy efficiency. Here, we introduce a new electrode design for direct bicarbonate (HCO 3 − ) conversion using highly porous copper electrodes coated with an ionomer/carbon layer. Multiphysics modeling results reveal that increasing HCO 3 − concentration enhances local in situ‐generated CO 2 ( i ‐CO 2 ) availability but suppresses the alkaline microenvironment required for C‐C coupling. We found that partially coating a large‐pore Cu electrode with the ionomer/carbon layer addresses the limitation by fine‐tuning the local reaction environment to favor C 2+ products while maintaining high CO 2 availability for high reaction rates. The optimized electrode achieves a C 2 H 4 Faradaic efficiency (FE) of 43% (total C 2+ FE of 60%) at 150 mA/cm 2 , with a low full‐cell voltage of 3.38 V. When coupled to a dilute CO 2 source (20% in argon) and pulsed operation, the system sustains > 30% C 2 H 4 FE for ∼150 h at 150 mA/cm 2 .

Förderung

  • Natural Sciences and Engineering Research Council of Canada
  • Queen's University

Zitieren

APA

Nguyen, T., Nguyen, A. N., Gao, G., Crane, J., Trần‐Phú, T., Silva, G. T. D., Gonzalez‐Lopez, A., Lai, H., Dinh, K. H., Phan‐Pham, D., Guay, M., Escobedo, C., Hocking, R. K., Raisin, J., Mascaro, L. H., & Dinh, C. (2026). Modulation of Local Environment for Selective Bicarbonate Conversion to Multi‐Carbon Products. Advanced Energy Materials. https://doi.org/10.1002/aenm.71214

Vancouver

Nguyen T, Nguyen AN, Gao G, Crane J, Trần‐Phú T, Silva GTD, et al. Modulation of Local Environment for Selective Bicarbonate Conversion to Multi‐Carbon Products. Advanced Energy Materials. 2026. doi:10.1002/aenm.71214

BibTeX
@article{Nguyen2026,
  author = {Nguyen, Tai and Nguyen, Anh N. and Gao, Guorui and Crane, Jackson and Trần‐Phú, Thành and Silva, Gelson Tavares da and Gonzalez‐Lopez, Aldo and Lai, Hung and Dinh, Khac Huy and Phan‐Pham, Duc‐Minh and Guay, Martin and Escobedo, Carlos and Hocking, Rosalie K. and Raisin, Jonathan and Mascaro, Lucia H. and Dinh, Cao‐Thang},
  title = {Modulation of Local Environment for Selective Bicarbonate Conversion to Multi‐Carbon Products},
  journal = {Advanced Energy Materials},
  year = {2026},
  doi = {10.1002/aenm.71214}
}
Kostenlos starten →