EUVIMEDEUVIMED entdecken
Crossref

Pushing Energy Density Limits: Anode‐Less Solid‐State Battery Integrated With Amorphous Lithium Vanadium Oxide Thin‐Film Cathode

Subhashree Behera, Dae‐Kwon Boo, Junki Lee, Un Hwan Lee, Yun Chang Park, Joonhee Kang, Jong Min Yuk, Ji‐Won Jung, Hyun‐Suk Kim

Advanced Energy Materials · 2026-08 · 16 (31)

DOI: 10.1002/aenm.71042 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 07.05.2026. Verfasst von Subhashree Behera und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 67 Literaturangaben. Gefördert von: National Research Foundation of Korea, Korea Basic Science Institute.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Anode‐less all‐solid‐state batteries offer a promising route to maximize stack‐level volumetric energy density by eliminating pre‐installed lithium (Li) and forming the anode in situ on a bare current collector. However, in thin‐film microbatteries, anode‐less operation is highly sensitive to Li loss, which occurs via interphase formation, dead‐Li isolation, and stripping‐induced contact loss. Here, we develop an anode‐less thin‐film battery platform using lithiated vanadium oxide (LVO) cathodes and a lithium phosphorus oxynitride solid electrolyte, targeting the critical challenge of stabilizing Li nucleation and stripping at the solid–solid anode interface. Systematic screening of ultrathin current–collector modifications, including carbon‐only, metal‐only, and metal/carbon bilayers (Au, Ag, Zn, Al, and Sn), identifies Sn/C as the most effective seed layer, yielding the lowest nucleation overpotential, reduced voltage hysteresis, improved galvanostatic stability, and the most uniform Li plating morphology. To further mitigate first‐cycle Li loss, a reversed‐structure prelithiation step introduces a controlled Li reservoir on the seeded collector, enabling gradual activation and stable cycling. The optimized anode‐less full cell with a 2‐µm‐thick LVO cathode achieves a volumetric energy density of 235.13 Wh L −1 at the 100 th cycle. These results establish practical guidelines for interlayer selection and interface engineering to enable durable anode‐less thin‐film batteries.

Förderung

  • National Research Foundation of Korea
  • Korea Basic Science Institute

Zitieren

APA

Behera, S., Boo, D., Lee, J., Lee, U. H., Park, Y. C., Kang, J., Yuk, J. M., Jung, J., & Kim, H. (2026). Pushing Energy Density Limits: Anode‐Less Solid‐State Battery Integrated With Amorphous Lithium Vanadium Oxide Thin‐Film Cathode. Advanced Energy Materials, 16(31). https://doi.org/10.1002/aenm.71042

Vancouver

Behera S, Boo D, Lee J, Lee UH, Park YC, Kang J, et al. Pushing Energy Density Limits: Anode‐Less Solid‐State Battery Integrated With Amorphous Lithium Vanadium Oxide Thin‐Film Cathode. Advanced Energy Materials. 2026;16(31). doi:10.1002/aenm.71042

BibTeX
@article{Behera2026,
  author = {Behera, Subhashree and Boo, Dae‐Kwon and Lee, Junki and Lee, Un Hwan and Park, Yun Chang and Kang, Joonhee and Yuk, Jong Min and Jung, Ji‐Won and Kim, Hyun‐Suk},
  title = {Pushing Energy Density Limits: Anode‐Less Solid‐State Battery Integrated With Amorphous Lithium Vanadium Oxide Thin‐Film Cathode},
  journal = {Advanced Energy Materials},
  year = {2026},
  volume = {16},
  number = {31},
  doi = {10.1002/aenm.71042}
}
Kostenlos starten →