EUVIMEDEUVIMED entdecken
Crossref

Enthalpy‐Driven Microstructure Reconfiguration for High‐Performance Half‐Heusler Alloys

Qiqi Tang, Quanzheng Deng, Binbin Jiang, Peng Li, Yan Wang, Zhongbin Wang, Xusheng Liu, Baohai Jia, Zhenlong Huang, Chongjian Zhou, Guang Yao, Yuan Lin und 2 weitere

Advanced Energy Materials · 2026-06 · 16 (21)

DOI: 10.1002/aenm.70896 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 01.04.2026. Verfasst von Qiqi Tang und 13 weiteren Autor:innen. Die Arbeit nennt 68 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Shenzhen Science and Technology Innovation Program, Basic and Applied Basic Research Foundation of Guangdong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Half‐Heusler (HH) alloys have attracted extensive attention due to their exceptional mechanical properties and high‐temperature thermal stability. However, simultaneously optimizing their power factor ( PF ) and figure of merit ( zT ) remains challenging due to the conflict of tuning electron and phonon behavior. Here, a microstructure reconfiguration strategy based on tuning the enthalpy‐dominated atomic chemical affinity is proposed to decouple electrical and thermal transport properties. The introduction of Yb into Hf‐doped ZrNiSn alloys weakens the d ‐ d orbital hybridization, which reduces the negative mixing enthalpy and diminishes the atomic affinity, thereby suppressing the formation of Hf precipitates. The Hf precipitates are transformed into superstructures, which promote the electron mobility with a 55% increase by eliminating the electron scattering around discontinuous lattices and introducing strong phonon scattering to suppres the thermal conductivity. Therefore, a “double‐high” Zr 0.66 Hf 0.3 Yb 0.04 NiSn 0.98 Sb 0.02 material with a high PF of 58 µW·cm − 1 ·K − 2 and a peak zT of 1.32 at 950 K was obtained, contributing to a high experimental conversion efficiency of 10.2% in the fabricated module, which is among the highest values in HH alloys. This work highlights enthalpy‐dominated microstructure reconfiguration as an effective pathway for developing high performance thermoelectric power generations.

Förderung

  • National Natural Science Foundation of China
  • Shenzhen Science and Technology Innovation Program
  • Basic and Applied Basic Research Foundation of Guangdong Province
  • National Key Research and Development Program of China

Zitieren

APA

Tang, Q., Deng, Q., Jiang, B., Li, P., Wang, Y., Wang, Z., Liu, X., Jia, B., Huang, Z., Zhou, C., Yao, G., Lin, Y., Liu, R., & He, J. (2026). Enthalpy‐Driven Microstructure Reconfiguration for High‐Performance Half‐Heusler Alloys. Advanced Energy Materials, 16(21). https://doi.org/10.1002/aenm.70896

Vancouver

Tang Q, Deng Q, Jiang B, Li P, Wang Y, Wang Z, et al. Enthalpy‐Driven Microstructure Reconfiguration for High‐Performance Half‐Heusler Alloys. Advanced Energy Materials. 2026;16(21). doi:10.1002/aenm.70896

BibTeX
@article{Tang2026,
  author = {Tang, Qiqi and Deng, Quanzheng and Jiang, Binbin and Li, Peng and Wang, Yan and Wang, Zhongbin and Liu, Xusheng and Jia, Baohai and Huang, Zhenlong and Zhou, Chongjian and Yao, Guang and Lin, Yuan and Liu, Ruiheng and He, Jiaqing},
  title = {Enthalpy‐Driven Microstructure Reconfiguration for High‐Performance Half‐Heusler Alloys},
  journal = {Advanced Energy Materials},
  year = {2026},
  volume = {16},
  number = {21},
  doi = {10.1002/aenm.70896}
}
Kostenlos starten →