EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Enabling Long Term, Shelf‐Stable Perovskite Solar Cells: Alumina Barriers to Protect Perovskite Devices from Moisture and Oxygen

Melissa A. Davis, Kelly Schutt, Duong Nguyen Minh, Xinwen Zhang, Chenchao Xie, Ross A. Kerner, Tianran Liu, Matthew O. Reese, Laura T. Schelhas, Michael D. Kempe, Axel F. Palmstrom, Joseph M. Luther

Advanced Energy Materials · 2026-05 · 16 (19)

DOI: 10.1002/aenm.70834 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 17.03.2026. Verfasst von Melissa A. Davis und 11 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: U.S. Department of Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Current encapsulation architectures for thin‐film metal halide perovskite do not adequately eliminate all ambient stressors. Here, we develop low transmission rate barrier layers using atomic layer deposited (ALD) aluminum oxide grown directly on the completed photovoltaic (PV) device stack to provide an additional seal, prior to full packaging. We investigate the effect of deposition temperature and oxidant chemistries on the barrier growth for protection of perovskite photovoltaic devices. We characterize the layers individually, then integrate into devices to detail the tradeoff between protection and deposition compatibility. To enhance compatibility and impermeability, we present an approach using water as the aluminum oxidant during nucleation and switching from water to ozone for the remainder of the growth. At 50 nm, the barrier results in a water vapor transmission rate (WVTR) of 4.5·10 −4 g/m 2 /day, and 1,000‐hour device stability under 45°C with 85% relative humidity without further packaging. This barrier provides sufficient protection to enable minimal degradation of the perovskite solar cells while completely submerged in water for 140 minutes. Additionally, we characterize the oxygen transmission rate (OTR) to be 0.49 cm 3 /m 2 /day at 23°C and 0% relative humidity, which is 1.5 orders of magnitude improvement over the OTR of the current encapsulation.

Förderung

  • U.S. Department of Energy

Zitieren

APA

Davis, M. A., Schutt, K., Minh, D. N., Zhang, X., Xie, C., Kerner, R. A., Liu, T., Reese, M. O., Schelhas, L. T., Kempe, M. D., Palmstrom, A. F., & Luther, J. M. (2026). Enabling Long Term, Shelf‐Stable Perovskite Solar Cells: Alumina Barriers to Protect Perovskite Devices from Moisture and Oxygen. Advanced Energy Materials, 16(19). https://doi.org/10.1002/aenm.70834

Vancouver

Davis MA, Schutt K, Minh DN, Zhang X, Xie C, Kerner RA, et al. Enabling Long Term, Shelf‐Stable Perovskite Solar Cells: Alumina Barriers to Protect Perovskite Devices from Moisture and Oxygen. Advanced Energy Materials. 2026;16(19). doi:10.1002/aenm.70834

BibTeX
@article{Davis2026,
  author = {Davis, Melissa A. and Schutt, Kelly and Minh, Duong Nguyen and Zhang, Xinwen and Xie, Chenchao and Kerner, Ross A. and Liu, Tianran and Reese, Matthew O. and Schelhas, Laura T. and Kempe, Michael D. and Palmstrom, Axel F. and Luther, Joseph M.},
  title = {Enabling Long Term, Shelf‐Stable Perovskite Solar Cells: Alumina Barriers to Protect Perovskite Devices from Moisture and Oxygen},
  journal = {Advanced Energy Materials},
  year = {2026},
  volume = {16},
  number = {19},
  doi = {10.1002/aenm.70834}
}
Kostenlos starten →