EUVIMEDEUVIMED entdecken
Crossref

Stabilizing High‐Capacity Layered Cathode Materials via Nanocluster Cross‐Linked Polymer

Shuchang Liu, Yanru Zeng, Hao Wang, Cuimiao Wang, Rongrong Zhang, Chaozhi Wang, Jingqin Cui, Xiaoliang Fang

Advanced Energy Materials · 2026-03 · 16 (11)

DOI: 10.1002/aenm.202506402 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 15.01.2026. Verfasst von Shuchang Liu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ni‐rich layered oxides and Li‐rich layered oxides are technologically important high‐capacity cathode materials for constructing high‐energy‐density batteries. However, their practical application is severely limited by interfacial instability and structural degradation during cycling. Herein, an organic‐inorganic hybrid polymer (PHM‐T) composed of titanium‐oxo clusters (TOCs) cross‐linked polyurethane is proposed to stabilize high‐capacity layered oxides. Rationally designing the soft and hard domains of polyurethane endows PHM‐T with high mechanical strength, excellent electrolyte tolerance, and strong cathode affinity. When employed as a surface coating layer, PHM‐T acts as an artificial cathode electrolyte interphase and dramatically improves the structural and compositional stabilities of both Ni‐rich layered oxides and Li‐rich layered oxides. With the suppressed lattice distortion and transition‐metal dissolution, the PHM‐T coated LiNi 0.8 Mn 0.1 Co 0.1 O 2 achieves enhanced rate capability (149.8 mAh g −1 at 10 C) and cycling stability (78% capacity retention after 200 cycles at 1 C). More impressively, the TOC cross‐linked polymer can serve directly as a reinforced binder, enabling one‐step surface modification and electrode fabrication without the pre‐coating process, offering a convenient and industrially Binder engineering, Cathode‐electrolyte interphase, Layered cathode materials, Nanocluster cross‐linked polymer, interfacial engineeringcompatible “two‐in‐one” interfacial‐engineering route to develop high‐performance batteries.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liu, S., Zeng, Y., Wang, H., Wang, C., Zhang, R., Wang, C., Cui, J., & Fang, X. (2026). Stabilizing High‐Capacity Layered Cathode Materials via Nanocluster Cross‐Linked Polymer. Advanced Energy Materials, 16(11). https://doi.org/10.1002/aenm.202506402

Vancouver

Liu S, Zeng Y, Wang H, Wang C, Zhang R, Wang C, et al. Stabilizing High‐Capacity Layered Cathode Materials via Nanocluster Cross‐Linked Polymer. Advanced Energy Materials. 2026;16(11). doi:10.1002/aenm.202506402

BibTeX
@article{Liu2026,
  author = {Liu, Shuchang and Zeng, Yanru and Wang, Hao and Wang, Cuimiao and Zhang, Rongrong and Wang, Chaozhi and Cui, Jingqin and Fang, Xiaoliang},
  title = {Stabilizing High‐Capacity Layered Cathode Materials via Nanocluster Cross‐Linked Polymer},
  journal = {Advanced Energy Materials},
  year = {2026},
  volume = {16},
  number = {11},
  doi = {10.1002/aenm.202506402}
}
Kostenlos starten →