3D Printing Manufacturing of Thick Electrodes With Hierarchical Porous Structures for High‐Power Lithium Metal Batteries
Advanced Energy Materials · 2026-04 · 16 (16)
DOI: 10.1002/aenm.202506389 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 22.02.2026. Verfasst von Junhong Lv und 14 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Guangxi Province.
Abstract (Originalsprache)
Thick electrodes of Lithium Metal battery face significant challenges in balancing ionic transport kinetics with structural stability, particularly under high‐rate conditions. This study develops a synergistic fabrication strategy integrating direct ink writing 3D printing with ice‐templating and phase separation to construct LiFePO 4 thick electrodes with hierarchical porous architectures. Systematic rheological optimization identifies the P‐30% ink with ideal shear‐thinning behavior and shape retention capability (yield stress: 538.9 Pa, storage modulus: 21 480 Pa). The resulting electrode features macro‐printed channels and interconnected phase‐separated micropores, achieving high porosity (79.57%) and low tortuosity. This unique architecture delivers exceptional electrochemical performance: a specific capacity of 109.3 mAh g − 1 at 5C rate, 90.8% capacity retention after 2000 cycles, reduced charge transfer resistance (69.8 Ω), and enhanced Li‐ion diffusion coefficient (1.65 × 10 − 1 0 cm 2 s − 1 ). COMSOL simulations confirm improved ion transport efficiency and mitigated concentration polarization. The assembled pouch cell maintains stable performance over 10 000 bending cycles, demonstrating superior mechanical flexibility and practical application potential for high‐power energy storage systems.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Guangxi Province
Zitieren
APA
Lv, J., Zhao, P., Shen, F., Lv, B., Wang, X., Sun, C., Zhang, L., Zhang, S., Hua, W., Liao, B., Liao, X., Zhang, D., Huang, Y., Qiu, J., & Chen, X. (2026). 3D Printing Manufacturing of Thick Electrodes With Hierarchical Porous Structures for High‐Power Lithium Metal Batteries. Advanced Energy Materials, 16(16). https://doi.org/10.1002/aenm.202506389
Vancouver
Lv J, Zhao P, Shen F, Lv B, Wang X, Sun C, et al. 3D Printing Manufacturing of Thick Electrodes With Hierarchical Porous Structures for High‐Power Lithium Metal Batteries. Advanced Energy Materials. 2026;16(16). doi:10.1002/aenm.202506389
BibTeX
@article{Lv2026,
author = {Lv, Junhong and Zhao, Pengcheng and Shen, Fang and Lv, Bohao and Wang, Xudong and Sun, Cheng and Zhang, Lan and Zhang, Songtong and Hua, Weibo and Liao, Bin and Liao, Xiangbiao and Zhang, Dongcai and Huang, Yanping and Qiu, Jingyi and Chen, Xibang},
title = {3D Printing Manufacturing of Thick Electrodes With Hierarchical Porous Structures for High‐Power Lithium Metal Batteries},
journal = {Advanced Energy Materials},
year = {2026},
volume = {16},
number = {16},
doi = {10.1002/aenm.202506389}
}
EUVIMED