EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Enhanced Fast‐Charging Performance of High‐Mass‐Loading Mn‐Rich Li[Mn 1‐ x Fe x ]PO 4 Cathodes via LiF‐Less Cathode–Electrolyte Interphase

Bonyoung Ku, Lahyeon Jang, Hyunji Kweon, Jinho Ahn, Sunha Hwang, Jihoe Lee, Myungeun Choi, Sunyoung Yoo, Kwangho Yoo, Kyu‐Young Park, Jongsoon Kim

Advanced Energy Materials · 2026-04 · 16 (13)

DOI: 10.1002/aenm.202506130 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 24.01.2026. Verfasst von Bonyoung Ku und 10 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Ministry of Science and ICT, South Korea, Ministry of Trade, Industry and Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mn‐rich Li[Mn 1‐ x Fe x ]PO 4 (LMFP) cathodes are promising candidates for next‐generation lithium‐ion batteries due to their structural stability and cost‐effectiveness. However, under industrially relevant high‐mass‐loading conditions, they still suffer from severe performance degradation, particularly during fast charging. In this study, we systematically demonstrate that charge‐transfer resistance, rather than bulk Li + diffusivity, governs the kinetic limitations of LMFP electrodes with an areal capacity of ∼3.5 mAh cm −2 (∼23 mg cm −2 mass loading). Surface analyses reveal that the buildup of electronically and ionically insulating LiF at the cathode–electrolyte interphase (CEI) is the primary cause of sluggish charge transfer, highlighting a previously overlooked detrimental role of LiF. Guided by this insight, we implement an interfacial engineering strategy that suppresses LiF formation at the CEI. Remarkably, the resulting high‐mass‐loading LMFP cathodes deliver a 1.6‐fold increase in capacity at 5C and retain ∼87% of their initial capacity after 100 cycles at 2C. Moreover, operando structural analysis reveals that electrodes with LiF‐suppressed CEI maintain a robust single‐phase transition during fast cycling, directly linking interfacial LiF suppression to significantly enhanced charge‐transfer kinetics. This work highlights the critical importance of CEI engineering in enabling fast‐charging Mn‐rich olivine cathodes under practical, high‐mass‐loading conditions.

Förderung

  • Ministry of Science and ICT, South Korea
  • Ministry of Trade, Industry and Energy

Zitieren

APA

Ku, B., Jang, L., Kweon, H., Ahn, J., Hwang, S., Lee, J., Choi, M., Yoo, S., Yoo, K., Park, K., & Kim, J. (2026). Enhanced Fast‐Charging Performance of High‐Mass‐Loading Mn‐Rich Li[Mn 1‐ x Fe x ]PO 4 Cathodes via LiF‐Less Cathode–Electrolyte Interphase. Advanced Energy Materials, 16(13). https://doi.org/10.1002/aenm.202506130

Vancouver

Ku B, Jang L, Kweon H, Ahn J, Hwang S, Lee J, et al. Enhanced Fast‐Charging Performance of High‐Mass‐Loading Mn‐Rich Li[Mn 1‐ x Fe x ]PO 4 Cathodes via LiF‐Less Cathode–Electrolyte Interphase. Advanced Energy Materials. 2026;16(13). doi:10.1002/aenm.202506130

BibTeX
@article{Ku2026,
  author = {Ku, Bonyoung and Jang, Lahyeon and Kweon, Hyunji and Ahn, Jinho and Hwang, Sunha and Lee, Jihoe and Choi, Myungeun and Yoo, Sunyoung and Yoo, Kwangho and Park, Kyu‐Young and Kim, Jongsoon},
  title = {Enhanced Fast‐Charging Performance of High‐Mass‐Loading Mn‐Rich Li[Mn 1‐ x Fe x ]PO 4 Cathodes via LiF‐Less Cathode–Electrolyte Interphase},
  journal = {Advanced Energy Materials},
  year = {2026},
  volume = {16},
  number = {13},
  doi = {10.1002/aenm.202506130}
}
Kostenlos starten →