Photoelectrochemical CO 2 ‐to‐Formic Acid Conversions: Advances in Photoelectrode Designs and Scale‐Up Strategies
Advanced Energy Materials · 2026-01 · 16 (2)
DOI: 10.1002/aenm.202504018 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 13.10.2025. Verfasst von Bilawal Khan und 7 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 328 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: City University of Hong Kong.
Abstract (Originalsprache)
Rapid decarbonization requires renewable technologies that convert carbon dioxide (CO 2 ) into energy‐dense, carbon‐neutral fuels. Among those, photoelectrochemical CO 2 conversion systems offer a direct and efficient pathway by coupling light‐harvesting and electrocatalytic components within a single device. Among CO 2 ‐derived by‐products, formic acid remains significant owing to its high volumetric energy density, liquid‐phase storability, and transportable hydrogen carrier. This review outlines fundamental light‐driven and catalytic processes of CO 2 ‐to‐formic acid conversion and demonstrates its key performance merits. Device configuration of various photoelectrochemical CO 2 ‐to‐formic acid conversion systems is analyzed with their recent advancements and bottlenecks. Despite significant progress of these systems, studies confirm that practical deployment remains limited by insufficient power output from photoelectrodes that limits bias‐free operation, sluggish multi‐electron kinetics that suppress conversion rates, and complex device architecture that hinders long‐term and scale‐up operation. Engineering and operational limitations that prevent photoelectrodes from bias‐free operation, long‐term stability, and efficient solar‐to‐fuel conversion efficiency are then investigated, and strategies to overcome these limitations are outlined. Furthermore, engineering strategies of compact electrolyzers are discussed to perform CO 2 ‐to‐formic acid conversion under high light‐intensity. Key considerations to overcome mass transport limitations and address downstream formic acid separation challenges are discussed to bridge gap between laboratory‐scale demonstrations and real‐world applications.
Förderung
- City University of Hong Kong
Zitieren
APA
Khan, B., Faheem, M. B., Peramaiah, K., Cheng, Y., Khan, B., Qiao, Q., Huang, K., & He, J. (2026). Photoelectrochemical CO 2 ‐to‐Formic Acid Conversions: Advances in Photoelectrode Designs and Scale‐Up Strategies. Advanced Energy Materials, 16(2). https://doi.org/10.1002/aenm.202504018
Vancouver
Khan B, Faheem MB, Peramaiah K, Cheng Y, Khan B, Qiao Q, et al. Photoelectrochemical CO 2 ‐to‐Formic Acid Conversions: Advances in Photoelectrode Designs and Scale‐Up Strategies. Advanced Energy Materials. 2026;16(2). doi:10.1002/aenm.202504018
BibTeX
@article{Khan2026,
author = {Khan, Bilawal and Faheem, M. Bilal and Peramaiah, Karthik and Cheng, Yuk‐Tong and Khan, Bangul and Qiao, Quinn and Huang, Kuo‐Wei and He, Jr‐Hau},
title = {Photoelectrochemical CO 2 ‐to‐Formic Acid Conversions: Advances in Photoelectrode Designs and Scale‐Up Strategies},
journal = {Advanced Energy Materials},
year = {2026},
volume = {16},
number = {2},
doi = {10.1002/aenm.202504018}
}
EUVIMED