Template‐Assisted Growth of Cs x FA 1‐x PbI 3 with Pulsed Laser Deposition for Single Junction Perovskite Solar Cells
Advanced Energy Materials · 2025-06 · 15 (24)
DOI: 10.1002/aenm.202406033 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 25.02.2025. Verfasst von Suzana Kralj und 9 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung.
Abstract (Originalsprache)
Cesium‐formamidinium lead iodide (Cs x FA 1‐x PbI 3 ) perovskites are a promising methylammonium‐free alternative for efficient single‐junction solar cells. However, they have not been fully explored by vapor‐phase deposition techniques. Herein, a template‐assisted approach is demonstrated for the growth of Cs x FA 1‐x PbI 3 perovskite films using pulsed laser deposition (PLD) from a single‐source target of mixed precursors. Implementing a lead iodide (PbI 2 ) + Cs x FA 1‐x PbI 3 tailored template, phase‐pure Cs x FA 1‐x PbI 3 films with uniform coverage on both planar and textured substrates are achieved. Compositional analysis via X‐ray fluorescence confirms near‐stoichiometric transfer of the inorganic cations (Cs/Pb), with identical Cs 0.2 FA 0.8 PbI 3 composition and a bandgap of 1.58 eV achieved in templated and non‐templated films. However, the presence of the template proves essential for attaining phase‐pure films in the photoactive cubic (α‐) phase. Proof‐of‐concept solar cells fabricated with templated‐PLD α‐Cs x FA 1‐x PbI 3 achieve an efficiency exceeding 12.9% on 0.1 cm 2 area devices without the employment of passivation approaches. Additionally, increasing deposition rates does not alter the phase, morphology, or optoelectronic properties of the templated films on textured substrates, indicating the robustness of this methodology. The compositional control of PLD for Cs‐FA‐based perovskites is showcased, and template‐assisted growth is demonstrated as a reliable pathway to high‐quality reproducible perovskite films.
Förderung
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
Zitieren
APA
Kralj, S., Artuk, K., Wieczorek, A., Orlov, N., Eftekhari, Z., Saive, R., Garnett, E., Siol, S., Wolff, C. M., & Morales‐Masis, M. (2025). Template‐Assisted Growth of Cs x FA 1‐x PbI 3 with Pulsed Laser Deposition for Single Junction Perovskite Solar Cells. Advanced Energy Materials, 15(24). https://doi.org/10.1002/aenm.202406033
Vancouver
Kralj S, Artuk K, Wieczorek A, Orlov N, Eftekhari Z, Saive R, et al. Template‐Assisted Growth of Cs x FA 1‐x PbI 3 with Pulsed Laser Deposition for Single Junction Perovskite Solar Cells. Advanced Energy Materials. 2025;15(24). doi:10.1002/aenm.202406033
BibTeX
@article{Kralj2025,
author = {Kralj, Suzana and Artuk, Kerem and Wieczorek, Alexander and Orlov, Nikolai and Eftekhari, Zeinab and Saive, Rebecca and Garnett, Erik and Siol, Sebastian and Wolff, Christian M. and Morales‐Masis, Monica},
title = {Template‐Assisted Growth of Cs x FA 1‐x PbI 3 with Pulsed Laser Deposition for Single Junction Perovskite Solar Cells},
journal = {Advanced Energy Materials},
year = {2025},
volume = {15},
number = {24},
doi = {10.1002/aenm.202406033}
}
EUVIMED