EUVIMEDEUVIMED entdecken
Crossref

Enhanced Indoor Perovskite Solar Cells: Mitigating Interface Defects and Charge Transport Losses with Polyarene‐Based Hole‐Selective Layers

Zhong‐En Shi, Kalidass Kollimalaian, Jun‐Kai Peng, Chi‐Wei Lin, Wei‐Tao Peng, Bing‐Huang Jiang, Yu Hsuan Lin, Lan‐Yu Yang, Yu‐Chen Lin, Parthasarathy Venkatakrishnan, Yuan Jay Chang, Chih‐Ping Chen

Advanced Energy Materials · 2025-02 · 15 (6)

DOI: 10.1002/aenm.202404234 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 29.11.2024. Verfasst von Zhong‐En Shi und 11 weiteren Autor:innen. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: National Science and Technology Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study designs and synthesizes non‐planar, propeller‐shaped hexaarylbenzene‐type (HAB) compound K5‐36 and hexa‐ peri ‐hexabenzocoronene (HBC)‐based K5‐13 (with a cyclized core), as cost‐effective and high‐yielding hole selective layers (HSLs) for perovskite solar cells (PSC). Using a p–i–n device structure with ITO/4PADCB/HAB or HBC (with or without)/perovskite/PDADI/PC 61 BM/BCP/Ag, the interaction is investigated between the synthesized materials and self‐assembled monolayer (4PADCB) elucidating mechanisms influencing the growth of wide bandgap Cs 0.18 FA 0.82 Pb(I 0.8 Br 0.2 ) 3 perovskite. K5‐36 facilitates the growth of wide perovskite films with larger grains and lower defect density, while promoting energy level alignment at the HSL/perovskite interface. These modifications effectively suppressed non‐radiative recombination, resulting in a higher open‐circuit voltage of 1.2V and a power conversion efficiency (PCE) exceeding 20% under AM 1.5G conditions. Under 3000K LED (1000 lux) illumination, the PCE of 4PADCB/ K5‐36 ‐based PSCs significantly increased from 38.02 ± 0.38% (4PADCB PSC) to 41.80 ± 0.57%. Moreover, PSCs incorporating 4PADCB/ K5‐36 ‐ and 4PADCB/ K5‐13 ‐ demonstrate exceptional stability, retaining ≈88.5% and 98.2% of their initial PCE after 70 days of storage in a glove box. These findings highlight the potential of polyarene‐based HSLs as a promising approach for improving PSC efficiency and stability.

Förderung

  • National Science and Technology Council

Zitieren

APA

Shi, Z., Kollimalaian, K., Peng, J., Lin, C., Peng, W., Jiang, B., Lin, Y. H., Yang, L., Lin, Y., Venkatakrishnan, P., Chang, Y. J., & Chen, C. (2025). Enhanced Indoor Perovskite Solar Cells: Mitigating Interface Defects and Charge Transport Losses with Polyarene‐Based Hole‐Selective Layers. Advanced Energy Materials, 15(6). https://doi.org/10.1002/aenm.202404234

Vancouver

Shi Z, Kollimalaian K, Peng J, Lin C, Peng W, Jiang B, et al. Enhanced Indoor Perovskite Solar Cells: Mitigating Interface Defects and Charge Transport Losses with Polyarene‐Based Hole‐Selective Layers. Advanced Energy Materials. 2025;15(6). doi:10.1002/aenm.202404234

BibTeX
@article{Shi2025,
  author = {Shi, Zhong‐En and Kollimalaian, Kalidass and Peng, Jun‐Kai and Lin, Chi‐Wei and Peng, Wei‐Tao and Jiang, Bing‐Huang and Lin, Yu Hsuan and Yang, Lan‐Yu and Lin, Yu‐Chen and Venkatakrishnan, Parthasarathy and Chang, Yuan Jay and Chen, Chih‐Ping},
  title = {Enhanced Indoor Perovskite Solar Cells: Mitigating Interface Defects and Charge Transport Losses with Polyarene‐Based Hole‐Selective Layers},
  journal = {Advanced Energy Materials},
  year = {2025},
  volume = {15},
  number = {6},
  doi = {10.1002/aenm.202404234}
}
Kostenlos starten →