Solvent‐Assisted Surface Modification Using Metallocene‐Based Molecules for High‐Efficiency Perovskite/Silicon Tandem Solar Cells
Advanced Energy Materials · 2024-08 · 14 (31)
DOI: 10.1002/aenm.202401039 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 22.05.2024. Verfasst von Chang Wang und 19 weiteren Autor:innen. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 56 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.
Abstract (Originalsprache)
The presence of a high density of defects at the perovskite/electron transport layer (ETL) interface results in significant nonradiative recombination losses, thus impeding the efficiency enhancement of perovskite/silicon tandem solar cells (TSCs). In this investigation, a metallocene‐based molecule, cobalt (III) dichlorophene hexafluorophosphate (CcPF 6 ), is employed for perovskite surface passivation. To maximize its efficacy, the molecule is dissolved in a mixed solvent of acetonitrile and chlorobenzene, leading to the reconstruction of the perovskite surface and effective passivation of surface defects. This modification strategy substantially enhances the overall efficiency of perovskite/silicon tandem solar cells by mitigating the issue of low fill factor resulting from non‐uniform coating of the top perovskite layer on the textured silicon bottom cell. Leveraging a double‐sided textured silicon heterojunction (HJT) bottom cell, a certified power conversion efficiency (PCE) of 30.43% for a monolithic perovskite/silicon TSC (1.00 cm 2 ) is achieved, featuring an open‐circuit voltage ( V oc ) of 1.93 V and a fill factor ( FF ) of 78.43%. After storage in the drying cabinet (5% humidity at 20 °C) for 1000 h, the device retains 94.27% of its initial performance.
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
Zitieren
APA
Wang, C., Wang, S., Shi, W., Su, Z., Gao, K., Cao, F., Xu, D., Lou, X., Wang, X., Li, K., Li, W., Chen, X., Li, H., Li, W., Tong, A., Xiao, Y., Liu, J., Zhang, X., Yang, J., & Yang, X. (2024). Solvent‐Assisted Surface Modification Using Metallocene‐Based Molecules for High‐Efficiency Perovskite/Silicon Tandem Solar Cells. Advanced Energy Materials, 14(31). https://doi.org/10.1002/aenm.202401039
Vancouver
Wang C, Wang S, Shi W, Su Z, Gao K, Cao F, et al. Solvent‐Assisted Surface Modification Using Metallocene‐Based Molecules for High‐Efficiency Perovskite/Silicon Tandem Solar Cells. Advanced Energy Materials. 2024;14(31). doi:10.1002/aenm.202401039
BibTeX
@article{Wang2024,
author = {Wang, Chang and Wang, Shibo and Shi, Wei and Su, Zhaojun and Gao, Kun and Cao, Fengxian and Xu, Dacheng and Lou, Xinliang and Wang, Xinyu and Li, Kun and Li, WenHao and Chen, Xiang and Li, Haicheng and Li, Wenhao and Tong, Anling and Xiao, Yongtian and Liu, Jiang and Zhang, Xiaohong and Yang, Juan and Yang, Xinbo},
title = {Solvent‐Assisted Surface Modification Using Metallocene‐Based Molecules for High‐Efficiency Perovskite/Silicon Tandem Solar Cells},
journal = {Advanced Energy Materials},
year = {2024},
volume = {14},
number = {31},
doi = {10.1002/aenm.202401039}
}
EUVIMED