EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Nitridated Nickel Mesh as Industrial Water and Alcohol Oxidation Catalyst: Reconstruction and Iron‐Incorporation Matters

Suptish Ghosh, Jan Niklas Hausmann, Lukas Reith, Gonela Vijaykumar, Johannes Schmidt, Konstantin Laun, Stefan Berendts, Ingo Zebger, Matthias Driess, Prashanth W. Menezes

Advanced Energy Materials · 2024-06 · 14 (22)

DOI: 10.1002/aenm.202400356 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 19.03.2024. Verfasst von Suptish Ghosh und 9 weiteren Autor:innen. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Bundesministerium für Bildung und Forschung.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nickel mesh (NM) is used in industrial alkaline water electrolyzers due to its cost‐effectiveness and conductivity. However, the decisive factors that advance the efficiency and sustainability of such electrodes are only partially understood. Herein, an efficient NM‐based electrocatalyst for the oxygen evolution reaction is developed via a single‐step nitridation route on a commercially used NM substrate and sheds light on the role of reconstruction and iron content to boost catalyst performance and durability. Remarkably, the activated Ni 3 N/NM catalyst required an overpotential of 0.46 V to deliver 1 A cm −2 in ambient conditions (1 M KOH, 25 °C). This overpotential decreases substantially to 0.28 V in industrially relevant conditions (6 M KOH, 85 °C) and is maintained for 235 h. Ni 3 N/NM partially transformed into NiFe layered (oxy)hydroxide in both conditions, while the active structure's Fe content is reconstruction condition dependent (temperature and KOH concentration). Electrodes reconstructed under industrially relevant conditions performed better than ambient reconstructed ones due to a more pronounced iron‐incorporation from KOH and the evolution of porous morphologies. In industrial environments, activated Ni 3 N/NM excels in selectively converting benzyl alcohol to benzoic acid, achieving an impressive yield of 96%.

Förderung

  • Deutsche Forschungsgemeinschaft
  • Bundesministerium für Bildung und Forschung

Zitieren

APA

Ghosh, S., Hausmann, J. N., Reith, L., Vijaykumar, G., Schmidt, J., Laun, K., Berendts, S., Zebger, I., Driess, M., & Menezes, P. W. (2024). Nitridated Nickel Mesh as Industrial Water and Alcohol Oxidation Catalyst: Reconstruction and Iron‐Incorporation Matters. Advanced Energy Materials, 14(22). https://doi.org/10.1002/aenm.202400356

Vancouver

Ghosh S, Hausmann JN, Reith L, Vijaykumar G, Schmidt J, Laun K, et al. Nitridated Nickel Mesh as Industrial Water and Alcohol Oxidation Catalyst: Reconstruction and Iron‐Incorporation Matters. Advanced Energy Materials. 2024;14(22). doi:10.1002/aenm.202400356

BibTeX
@article{Ghosh2024,
  author = {Ghosh, Suptish and Hausmann, Jan Niklas and Reith, Lukas and Vijaykumar, Gonela and Schmidt, Johannes and Laun, Konstantin and Berendts, Stefan and Zebger, Ingo and Driess, Matthias and Menezes, Prashanth W.},
  title = {Nitridated Nickel Mesh as Industrial Water and Alcohol Oxidation Catalyst: Reconstruction and Iron‐Incorporation Matters},
  journal = {Advanced Energy Materials},
  year = {2024},
  volume = {14},
  number = {22},
  doi = {10.1002/aenm.202400356}
}
Kostenlos starten →