EUVIMEDEUVIMED entdecken
Crossref

In Situ Polymerization of Cross‐Linked Perovskite–Polymer Composites for Highly Stable and Efficient Perovskite Solar Cells

He Guo, Geon Woo Yoon, Zi Jia Li, Yeonghun Yun, Sangwook Lee, You‐Hyun Seo, Nam Joong Jeon, Gill Sang Han, Hyun Suk Jung

Advanced Energy Materials · 2024-01 · 14 (1)

DOI: 10.1002/aenm.202302743 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, 2023-11. Verfasst von He Guo und 8 weiteren Autor:innen. Die Arbeit wurde bisher 50-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Research Foundation of Korea, Korea Evaluation Institute of Industrial Technology, Korea Research Institute of Chemical Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mixed‐halide perovskites have emerged as outstanding light absorbers that enable the fabrication of efficient solar cells; however, their instability hinders the commercialization of such systems. Grain‐boundary (GB) defects and lattice tensile strain are critical intrinsic‐instability factors in polycrystalline perovskite films. In this study, the light‐induced cross‐linking of acrylamide (Am) monomers with non‐crystalline perovskite films is used to fabricate highly efficient and stable perovskite solar cells (PSCs). The Am monomers induce the preferred crystal orientation in the polycrystalline perovskite films, enlarge the perovskite grain size, and cross‐link the perovskite grains. Additionally, the liquid properties of Am effectively releases lattice strain during perovskite‐film crystallization. The cross‐linked interfacial layer functions as an airtight wall that protects the perovskite film from water corrosion. Devices fabricated using the proposed strategy show an excellent power conversion efficiency (PCE) of 24.45% with an open‐circuit voltage ( V OC ) of 1.199 V, which, to date, is the highest V OC reported for hybrid PSCs with electron transport layers (ETLs) comprised of TiO 2 . Large‐area PSC modules fabricated using the proposed strategy show a power conversion efficiency of 20.31% (with a high fill factor of 77.1%) over an active area of 33 cm 2 , with excellent storage stability.

Förderung

  • National Research Foundation of Korea
  • Korea Evaluation Institute of Industrial Technology
  • Korea Research Institute of Chemical Technology

Zitieren

APA

Guo, H., Yoon, G. W., Li, Z. J., Yun, Y., Lee, S., Seo, Y., Jeon, N. J., Han, G. S., & Jung, H. S. (2024). In Situ Polymerization of Cross‐Linked Perovskite–Polymer Composites for Highly Stable and Efficient Perovskite Solar Cells. Advanced Energy Materials, 14(1). https://doi.org/10.1002/aenm.202302743

Vancouver

Guo H, Yoon GW, Li ZJ, Yun Y, Lee S, Seo Y, et al. In Situ Polymerization of Cross‐Linked Perovskite–Polymer Composites for Highly Stable and Efficient Perovskite Solar Cells. Advanced Energy Materials. 2024;14(1). doi:10.1002/aenm.202302743

BibTeX
@article{Guo2024,
  author = {Guo, He and Yoon, Geon Woo and Li, Zi Jia and Yun, Yeonghun and Lee, Sangwook and Seo, You‐Hyun and Jeon, Nam Joong and Han, Gill Sang and Jung, Hyun Suk},
  title = {In Situ Polymerization of Cross‐Linked Perovskite–Polymer Composites for Highly Stable and Efficient Perovskite Solar Cells},
  journal = {Advanced Energy Materials},
  year = {2024},
  volume = {14},
  number = {1},
  doi = {10.1002/aenm.202302743}
}
Kostenlos starten →