EUVIMEDEUVIMED entdecken
Crossref

V OC of Inverted Perovskite Solar Cells Based on N‐Doped PCBM Exceeds 1.2 V: Interface Energy Alignment and Synergistic Passivation

Xiuhong Sun, Yonghai Li, Dachang Liu, Ruichen Liu, Bingqian Zhang, Qingyong Tian, Bin Fan, Xianzhao Wang, Zhipeng Li, Zhipeng Shao, Xiao Wang, Guanglei Cui und 1 weitere

Advanced Energy Materials · 2023-11 · 13 (41)

DOI: 10.1002/aenm.202302191 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 15.09.2023. Verfasst von Xiuhong Sun und 12 weiteren Autor:innen. Die Arbeit wurde bisher 90-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Shandong Energy Institute, Chinese Academy of Sciences.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Phenyl‐C61‐butyric acid methyl ester (PCBM) remains the most commonly used electron transport layer in inverted perovskite solar cells (IPSCs). However, its insufficient electrical properties and passivation ability limit the device's performance. In this study, it is demonstrated that introducing an appropriate amount of n‐type polymer N2200 into the PCBM can simultaneously enhance the electrical properties of PCBM and passivate the defects distributed on perovskite surface. This modification of PCBM leads to improved band alignment and enhanced electron mobility. Simultaneously, N2200 polymer contains electron donors such as O, S involved in passivating uncoordinated Pb 2+ defects. The PCBM@N2200‐based IPSCs exhibit an enhanced open‐circuit voltage ( V OC ) of 1.20 V with the minimum 0.36 V voltage loss and reach the champion power conversion efficiency (PCE) of 24.53% (certified PCE is 24.05%) with narrow distribution. Impressively, the corresponding module achieves an efficiency of 20.30% (11.19 cm 2 ). Moreover, the PCBM@N2200‐based IPSCs maintain 96% of their initial efficiency after operating at the maximum power point for 500 h, thanks to the interfacial passivation, improved uniformity, and increased hydrophobicity resulting from N2200 doping.

Förderung

  • National Natural Science Foundation of China
  • Shandong Energy Institute, Chinese Academy of Sciences

Zitieren

APA

Sun, X., Li, Y., Liu, D., Liu, R., Zhang, B., Tian, Q., Fan, B., Wang, X., Li, Z., Shao, Z., Wang, X., Cui, G., & Pang, S. (2023). V OC of Inverted Perovskite Solar Cells Based on N‐Doped PCBM Exceeds 1.2 V: Interface Energy Alignment and Synergistic Passivation. Advanced Energy Materials, 13(41). https://doi.org/10.1002/aenm.202302191

Vancouver

Sun X, Li Y, Liu D, Liu R, Zhang B, Tian Q, et al. V OC of Inverted Perovskite Solar Cells Based on N‐Doped PCBM Exceeds 1.2 V: Interface Energy Alignment and Synergistic Passivation. Advanced Energy Materials. 2023;13(41). doi:10.1002/aenm.202302191

BibTeX
@article{Sun2023,
  author = {Sun, Xiuhong and Li, Yonghai and Liu, Dachang and Liu, Ruichen and Zhang, Bingqian and Tian, Qingyong and Fan, Bin and Wang, Xianzhao and Li, Zhipeng and Shao, Zhipeng and Wang, Xiao and Cui, Guanglei and Pang, Shuping},
  title = {V OC of Inverted Perovskite Solar Cells Based on N‐Doped PCBM Exceeds 1.2 V: Interface Energy Alignment and Synergistic Passivation},
  journal = {Advanced Energy Materials},
  year = {2023},
  volume = {13},
  number = {41},
  doi = {10.1002/aenm.202302191}
}
Kostenlos starten →