EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High Sulfur Loading and Capacity Retention in Bilayer Garnet Sulfurized‐Polyacrylonitrile/Lithium‐Metal Batteries with Gel Polymer Electrolytes

Changmin Shi, Saya Takeuchi, George V. Alexander, Tanner Hamann, Jonathan O'Neill, Joseph A. Dura, Eric D. Wachsman

Advanced Energy Materials · 2023-11 · 13 (42)

DOI: 10.1002/aenm.202301656 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 24.09.2023. Verfasst von Changmin Shi und 6 weiteren Autor:innen. Die Arbeit wurde bisher 91-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: DEVCOM Army Research Laboratory.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The cubic‐garnet (Li 7 La 3 Zr 2 O 12 , LLZO) lithium–sulfur battery shows great promise in the pursuit of achieving high energy densities. The sulfur used in the cathodes is abundant, inexpensive, and possesses high specific capacity. In addition, LLZO displays excellent chemical stability with Li metal; however, the instabilities in the sulfur cathode/LLZO interface can lead to performance degradation that limits the development of these batteries. Therefore, it is critical to resolve these interfacial challenges to achieve stable cycling. Here, an innovative gel polymer buffer layer to stabilize the sulfur cathode/LLZO interface is created. Employing a thin bilayer LLZO (dense/porous) architecture as a solid electrolyte and significantly high sulfur loading of 5.2 mg cm −2 , stable cycling is achieved with a high initial discharge capacity of 1542 mAh g −1 (discharge current density of 0.87 mA cm −2 ) and an average discharge capacity of 1218 mAh g −1 (discharge current density of 1.74 mA cm −2 ) with 80% capacity retention over 265 cycles, at room temperature (22 °C) and without applied pressure. Achieving such stability with high sulfur loading is a major step in the development of potentially commercial garnet lithium–sulfur batteries.

Förderung

  • DEVCOM Army Research Laboratory

Zitieren

APA

Shi, C., Takeuchi, S., Alexander, G. V., Hamann, T., O'Neill, J., Dura, J. A., & Wachsman, E. D. (2023). High Sulfur Loading and Capacity Retention in Bilayer Garnet Sulfurized‐Polyacrylonitrile/Lithium‐Metal Batteries with Gel Polymer Electrolytes. Advanced Energy Materials, 13(42). https://doi.org/10.1002/aenm.202301656

Vancouver

Shi C, Takeuchi S, Alexander GV, Hamann T, O'Neill J, Dura JA, et al. High Sulfur Loading and Capacity Retention in Bilayer Garnet Sulfurized‐Polyacrylonitrile/Lithium‐Metal Batteries with Gel Polymer Electrolytes. Advanced Energy Materials. 2023;13(42). doi:10.1002/aenm.202301656

BibTeX
@article{Shi2023,
  author = {Shi, Changmin and Takeuchi, Saya and Alexander, George V. and Hamann, Tanner and O'Neill, Jonathan and Dura, Joseph A. and Wachsman, Eric D.},
  title = {High Sulfur Loading and Capacity Retention in Bilayer Garnet Sulfurized‐Polyacrylonitrile/Lithium‐Metal Batteries with Gel Polymer Electrolytes},
  journal = {Advanced Energy Materials},
  year = {2023},
  volume = {13},
  number = {42},
  doi = {10.1002/aenm.202301656}
}
Kostenlos starten →