The Regulation of Lithium Plating Behavior by State of Stripping in Working Lithium Metal Anode
Advanced Energy Materials · 2023-08 · 13 (29)
DOI: 10.1002/aenm.202300959 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 13.06.2023. Verfasst von Ye Xiao und 8 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: Natural Science Foundation of Beijing Municipality, Ministry of Science and Technology of the People's Republic of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
The enthusiasm of reviving lithium metal anodes has motivated the battery community to pursue higher Li utilization. To this end, an exhaustively complete stripping pattern (C‐stripping) is conventionally adopted to obtain a higher apparent Coulombic efficiency (CE) in individual cycles while ignoring the effects of Li stripping state on subsequent Li plating behavior. In this contribution, a partial stripping (P‐stripping) protocol, in which a tiny amount of active Li is intentionally reserved, is validated as beneficial for an improved realistic Li reversibility. Compared to the C‐stripping protocol, the partially reserved active Li in P‐stripping mode serves critically as nucleation sites for following Li plating, which not only reduces the nucleation overpotential for flattened Li deposition morphology, but also favorably facilitates the re‐utilization of the original solid electrolyte interphase (SEI). This explains the lower growth rates of both “dead Li” and SEI‐Li + under the P‐stripping protocol. Benefitting from the intrinsically more reversible Li cycling, the anode‐free Cu||LiNi 0.5 Co 0.2 Mn 0.3 O 2 cells using the P‐stripping protocol acquire higher available capacities in long‐term cycles. This work uncovers the crucial significance of the former state of Li stripping on regulating the following Li plating manner and SEI re‐utilization, providing fresh design implications toward more sustainable cycling of Li anodes.
Förderung
- Natural Science Foundation of Beijing Municipality
- Ministry of Science and Technology of the People's Republic of China
- National Natural Science Foundation of China
- Beijing Institute of Technology Research Fund Program for Young Scholars
Zitieren
APA
Xiao, Y., Xu, R., Xu, L., Zhan, Y., Ding, J., Zhang, S., Li, Z., Yan, C., & Huang, J. (2023). The Regulation of Lithium Plating Behavior by State of Stripping in Working Lithium Metal Anode. Advanced Energy Materials, 13(29). https://doi.org/10.1002/aenm.202300959
Vancouver
Xiao Y, Xu R, Xu L, Zhan Y, Ding J, Zhang S, et al. The Regulation of Lithium Plating Behavior by State of Stripping in Working Lithium Metal Anode. Advanced Energy Materials. 2023;13(29). doi:10.1002/aenm.202300959
BibTeX
@article{Xiao2023,
author = {Xiao, Ye and Xu, Rui and Xu, Lei and Zhan, Ying‐Xin and Ding, Jun‐Fan and Zhang, Shuo and Li, Ze‐Heng and Yan, Chong and Huang, Jia‐Qi},
title = {The Regulation of Lithium Plating Behavior by State of Stripping in Working Lithium Metal Anode},
journal = {Advanced Energy Materials},
year = {2023},
volume = {13},
number = {29},
doi = {10.1002/aenm.202300959}
}
EUVIMED