Perspective on the Preparation Methods of Single Crystalline High Nickel Oxide Cathode Materials
Advanced Energy Materials · 2023-08 · 13 (32)
DOI: 10.1002/aenm.202300378 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 08.07.2023. Verfasst von Weidong Zhou und 6 weiteren Autor:innen. Die Arbeit wurde bisher 92-mal zitiert (Crossref) und nennt 129 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Natural Science Foundation of Beijing Municipality.
Abstract (Originalsprache)
Li(Ni x Co y Mn z )O 2 ( x + y + z = 1, NCM), as one of the most dominant cathode materials in electric vehicle (EV) batteries, faces the challenges of poor cycling stability and safety concerns with the increase of Ni content and charge/discharge capacity. Single crystalline NCM (SC‐NCM) materials have been developed to mitigate these challenges, owing to their lower surface areas, fewer grain boundaries, and better morphological stability. Here, the preparation strategies of SC‐NCM are summarized, including continuous high‐temperature sintering (CHTS), molten salt method, pulse high‐temperature sintering (PHTS), and controllable growth with special orientations or sizes. CHTS produces irregular SC‐NCM particles, but is accompanied by Li‐volatilization and agglomeration during long‐term sintering. The molten salt helps to lower calcination temperature and generate well‐defined crystalline material, but generally causes large capacity loss due to the Li/H exchange in the following water rinsing procedure. To address the above challenges, the PHTS strategy has recently been recently proposed, which mitigates Li‐loss through shortened high‐temperature stage and avoids further water rinsing steps. For improving the C‐rate performance, controllable crystal growth with specific sizes and crystal orientations is highly desired, which calls for further investigation and upgrading of current large‐scale preparation technology.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Natural Science Foundation of Beijing Municipality
Zitieren
APA
Zhou, W., Huang, H., Liu, X., Gao, J., Hao, S., Yang, Y., & Qiu, J. (2023). Perspective on the Preparation Methods of Single Crystalline High Nickel Oxide Cathode Materials. Advanced Energy Materials, 13(32). https://doi.org/10.1002/aenm.202300378
Vancouver
Zhou W, Huang H, Liu X, Gao J, Hao S, Yang Y, et al. Perspective on the Preparation Methods of Single Crystalline High Nickel Oxide Cathode Materials. Advanced Energy Materials. 2023;13(32). doi:10.1002/aenm.202300378
BibTeX
@article{Zhou2023,
author = {Zhou, Weidong and Huang, Hao and Liu, Xiaohang and Gao, Jian and Hao, Shu‐meng and Yang, Yong and Qiu, Jieshan},
title = {Perspective on the Preparation Methods of Single Crystalline High Nickel Oxide Cathode Materials},
journal = {Advanced Energy Materials},
year = {2023},
volume = {13},
number = {32},
doi = {10.1002/aenm.202300378}
}
EUVIMED