EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Engineering Silicon Interfaces with Transparent Al y TiO x /ZnO/TiO 2 Stack Exhibiting Exceptional Passivating Contact Performance

Mohamed M. Shehata, Gabriel Bartholazzi, Daniel H. Macdonald, Lachlan E. Black

Advanced Energy Materials · 2023-05 · 13 (20)

DOI: 10.1002/aenm.202300251 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 07.04.2023. Verfasst von Mohamed M. Shehata und 3 weiteren Autor:innen. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Australian Renewable Energy Agency, Australian National Fabrication Facility.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Passivating contact technologies are essential for fabricating high‐efficiency crystalline silicon (c‐Si) solar cells, and their application and incorporation into manufacturing lines has ranked as a hot topic of research. Generally, ideal passivating contacts should combine excellent electrical contact, outstanding surface passivation, and high optical transparency. However, addressing all these criteria concurrently is challenging since it is unlikely for any single material to exhibit both efficient carrier transport and surface‐defect passivation while demonstrating negligible parasitic absorption. In this work, several earth‐abundant, wide‐bandgap materials are combined to engineer high‐quality transparent electron‐selective passivating contact structures capable of overcoming these obstacles. A highly transparent Al y TiO x /ZnO/TiO 2 stack with a total thickness of 3 nm, prepared by atomic layer deposition, is shown to provide a close‐to‐ideal passivating contact to Si surfaces by enabling dual functions of remarkable silicon surface passivation (with an effective minority carrier lifetime of 12.3 ms, an implied open‐circuit voltage of 730 mV, and a surface recombination current density prefactor of 2.6 fA cm −2 ), combined with efficient carrier transport with a very low contact resistivity of 3.4 mΩ cm 2 . These results demonstrate that low‐cost silicon interface‐engineering strategiesbased on transition metal oxides can push c‐Si solar cell performance to its theoretical limits.

Förderung

  • Australian Renewable Energy Agency
  • Australian National Fabrication Facility

Zitieren

APA

Shehata, M. M., Bartholazzi, G., Macdonald, D. H., & Black, L. E. (2023). Engineering Silicon Interfaces with Transparent Al y TiO x /ZnO/TiO 2 Stack Exhibiting Exceptional Passivating Contact Performance. Advanced Energy Materials, 13(20). https://doi.org/10.1002/aenm.202300251

Vancouver

Shehata MM, Bartholazzi G, Macdonald DH, Black LE. Engineering Silicon Interfaces with Transparent Al y TiO x /ZnO/TiO 2 Stack Exhibiting Exceptional Passivating Contact Performance. Advanced Energy Materials. 2023;13(20). doi:10.1002/aenm.202300251

BibTeX
@article{Shehata2023,
  author = {Shehata, Mohamed M. and Bartholazzi, Gabriel and Macdonald, Daniel H. and Black, Lachlan E.},
  title = {Engineering Silicon Interfaces with Transparent Al y TiO x /ZnO/TiO 2 Stack Exhibiting Exceptional Passivating Contact Performance},
  journal = {Advanced Energy Materials},
  year = {2023},
  volume = {13},
  number = {20},
  doi = {10.1002/aenm.202300251}
}
Kostenlos starten →