EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advanced Materials and Additive Manufacturing for Phase Change Thermal Energy Storage and Management: A Review

Thomas B. Freeman, Kyle E.O. Foster, Casey J. Troxler, Cameron W. Irvin, Anastasia Aday, Sandra K. S. Boetcher, Allison Mahvi, Matthew K. Smith, Adewale Odukomaiya

Advanced Energy Materials · 2023-06 · 13 (24)

DOI: 10.1002/aenm.202204208 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Energy Materials, online erschienen am 05.05.2023. Verfasst von Thomas B. Freeman und 8 weiteren Autor:innen. Die Arbeit wurde bisher 199-mal zitiert (Crossref) und nennt 213 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Renewable Energy Laboratory, U.S. Department of Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Phase change materials (PCMs) can enhance the performance of energy systems by time shifting or reducing peak thermal loads. The effectiveness of a PCM is defined by its energy and power density—the total available storage capacity (kWh m −3 ) and how fast it can be accessed (kW m −3 ). These are influenced by both material properties as well as geometry of the energy systems; however, prior efforts have primarily focused on improving material properties, namely, maximizing latent heat of fusion and increasing thermal conductivity. The latter is often at the expense of the former. Advanced manufacturing techniques hold tremendous potential to enable co‐optimization of material properties and device geometry, while potentially reducing material waste and manufacturing time. There is an emerging body of research focused on additive manufacturing of PCM composites and devices for thermal energy storage (TES) and thermal management. In this article, the fundamentals and applications of PCMs are reviewed and recent additive manufacturing advances in latent heat TES for both the PCM composite and associated heat exchanger are discussed. A forward‐looking perspective on the future and potential of PCM additive manufacturing for TES and thermal management is provided.

Förderung

  • National Renewable Energy Laboratory
  • U.S. Department of Energy

Zitieren

APA

Freeman, T. B., Foster, K. E., Troxler, C. J., Irvin, C. W., Aday, A., Boetcher, S. K. S., Mahvi, A., Smith, M. K., & Odukomaiya, A. (2023). Advanced Materials and Additive Manufacturing for Phase Change Thermal Energy Storage and Management: A Review. Advanced Energy Materials, 13(24). https://doi.org/10.1002/aenm.202204208

Vancouver

Freeman TB, Foster KE, Troxler CJ, Irvin CW, Aday A, Boetcher SKS, et al. Advanced Materials and Additive Manufacturing for Phase Change Thermal Energy Storage and Management: A Review. Advanced Energy Materials. 2023;13(24). doi:10.1002/aenm.202204208

BibTeX
@article{Freeman2023,
  author = {Freeman, Thomas B. and Foster, Kyle E.O. and Troxler, Casey J. and Irvin, Cameron W. and Aday, Anastasia and Boetcher, Sandra K. S. and Mahvi, Allison and Smith, Matthew K. and Odukomaiya, Adewale},
  title = {Advanced Materials and Additive Manufacturing for Phase Change Thermal Energy Storage and Management: A Review},
  journal = {Advanced Energy Materials},
  year = {2023},
  volume = {13},
  number = {24},
  doi = {10.1002/aenm.202204208}
}
Kostenlos starten →