EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Top Electrode Metal on Resistive Switching in Multilayer MOCVD MoS 2 Memristors

Dennis Braun, Jing Liu, Vasilis A. Maroufidis, Hleb Fiadziushkin, Lukas Völkel, Jimin Lee, Sofía Cruces, Annika Grundmann, Ke Ran, Thorsten Wahlbrink, Holger Kalisch, Andrei Vescan und 4 weitere

Advanced Electronic Materials · 2026-09 · 12 (18)

DOI: 10.1002/aelm.202600017 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Electronic Materials, online erschienen am 30.04.2026. Verfasst von Dennis Braun und 15 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 104 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: HORIZON EUROPE European Innovation Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Two‐dimensional (2D) materials such as molybdenum disulfide (MoS 2 ) show promise for memristor applications. Most MoS 2 memristors use vertical metal/MoS 2 /metal stacks with gold or silver active electrodes and rely on electron‐beam evaporation; sputtering is seldom used. This study investigates palladium (Pd), nickel (Ni), and aluminum (Al) as electrodes and compares resistive switching (RS) performance for sputtered versus evaporated top electrodes. Pd acts as a passive electrode with minimal contribution to RS. Devices with Ni active electrodes exhibit very low initial resistance and a small RS window, consistent with deposition‐induced damage to MoS 2 . Sputtered Al yields highly reproducible RS in Pd/MoS 2 /Al memristors, achieving 95% yield across 64 devices. In contrast, evaporated Al forms a parasitic oxide at the Al/MoS 2 interface that inhibits RS, even when deposited at a base pressure comparable to that of sputtered Al. Area scaling and temperature‐dependent measurements indicate Al filament formation and dissolution via electrochemical metallization as the RS mechanism. Metal‐specific energy barriers for filament formation explain the superior performance of sputtered Al. Overall, the results identify Al as an effective active electrode within the investigated device architecture and show that sputtering is a viable alternative for top‐electrode deposition because it suppresses interfacial oxide formation.

Förderung

  • HORIZON EUROPE European Innovation Council

Zitieren

APA

Braun, D., Liu, J., Maroufidis, V. A., Fiadziushkin, H., Völkel, L., Lee, J., Cruces, S., Grundmann, A., Ran, K., Wahlbrink, T., Kalisch, H., Vescan, A., Mayer, J., Heuken, M., Daus, A., & Lemme, M. C. (2026). Influence of Top Electrode Metal on Resistive Switching in Multilayer MOCVD MoS 2 Memristors. Advanced Electronic Materials, 12(18). https://doi.org/10.1002/aelm.202600017

Vancouver

Braun D, Liu J, Maroufidis VA, Fiadziushkin H, Völkel L, Lee J, et al. Influence of Top Electrode Metal on Resistive Switching in Multilayer MOCVD MoS 2 Memristors. Advanced Electronic Materials. 2026;12(18). doi:10.1002/aelm.202600017

BibTeX
@article{Braun2026,
  author = {Braun, Dennis and Liu, Jing and Maroufidis, Vasilis A. and Fiadziushkin, Hleb and Völkel, Lukas and Lee, Jimin and Cruces, Sofía and Grundmann, Annika and Ran, Ke and Wahlbrink, Thorsten and Kalisch, Holger and Vescan, Andrei and Mayer, Joachim and Heuken, Michael and Daus, Alwin and Lemme, Max C.},
  title = {Influence of Top Electrode Metal on Resistive Switching in Multilayer MOCVD MoS 2 Memristors},
  journal = {Advanced Electronic Materials},
  year = {2026},
  volume = {12},
  number = {18},
  doi = {10.1002/aelm.202600017}
}
Kostenlos starten →