EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low‐Temperature Annealed Cu/Al Bilayer Architecture for Highly Stable Flexible Metal‐Mesh Transparent Electrodes

Yourong Shu, Ruiyao Liu, Peng Wu, Yongjiang Di, Huichao He, Qian Yang, Wenrong Wang, Hanmei Jiang, Tao Han, Lijian Meng, Haibo Ruan, Sheng Tang

Advanced Electronic Materials · 2026-05 · 12 (9)

DOI: 10.1002/aelm.202600007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Electronic Materials, online erschienen am 15.04.2026. Verfasst von Yourong Shu und 11 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chongqing Municipal Key Research and Development Program of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flexible transparent electrodes (FTEs) are essential for next‐generation optoelectronics, yet indium tin oxide (ITO) is limited by brittleness and high cost. Copper metal meshes are promising alternatives but suffer from rapid oxidation. Here, we report a Cu/Al bilayer strategy in which an ultrathin Al overlayer self‐passivates into a compact Al 2 O 3 barrier, effectively suppressing Cu degradation while preserving optoelectronic performance. Low‐temperature vacuum annealing (≤125°C) further reduces defect induced scattering and improves interfacial conformity, yielding a 36% reduction in sheet resistance (0.196 to 0.125 Ω/□). The resulting Cu/Al films exhibit excellent environmental stability, with negligible resistance change after 168 h of damp‐heat aging (85°C/85% RH). Photolithographically patterned hexagonal Cu/Al meshes on PET achieve 4.58 Ω/□ at ≈81% visible transmittance, show only a 12% resistance increase after 150 days of natural aging (vs 42% for Cu), and maintain stable conductivity after 1000 bending cycles at 135°. Integrated into a touch sensor, the meshes demonstrate reliable touch, proximity, and force sensing. This scalable bilayer‐and‐anneal strategy enables oxidation‐resistant, high‐performance, ITO‐free transparent electrodes for flexible electronics.

Förderung

  • Chongqing Municipal Key Research and Development Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Shu, Y., Liu, R., Wu, P., Di, Y., He, H., Yang, Q., Wang, W., Jiang, H., Han, T., Meng, L., Ruan, H., & Tang, S. (2026). Low‐Temperature Annealed Cu/Al Bilayer Architecture for Highly Stable Flexible Metal‐Mesh Transparent Electrodes. Advanced Electronic Materials, 12(9). https://doi.org/10.1002/aelm.202600007

Vancouver

Shu Y, Liu R, Wu P, Di Y, He H, Yang Q, et al. Low‐Temperature Annealed Cu/Al Bilayer Architecture for Highly Stable Flexible Metal‐Mesh Transparent Electrodes. Advanced Electronic Materials. 2026;12(9). doi:10.1002/aelm.202600007

BibTeX
@article{Shu2026,
  author = {Shu, Yourong and Liu, Ruiyao and Wu, Peng and Di, Yongjiang and He, Huichao and Yang, Qian and Wang, Wenrong and Jiang, Hanmei and Han, Tao and Meng, Lijian and Ruan, Haibo and Tang, Sheng},
  title = {Low‐Temperature Annealed Cu/Al Bilayer Architecture for Highly Stable Flexible Metal‐Mesh Transparent Electrodes},
  journal = {Advanced Electronic Materials},
  year = {2026},
  volume = {12},
  number = {9},
  doi = {10.1002/aelm.202600007}
}
Kostenlos starten →