EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Self‐Adhesive Conductive Elastomers for Gel‐Free Biopotential Recording

Kirstie M. K. Queener, Alec Brewer, He Sun, Jack Twiddy, Vladimir A. Pozdin, Koji Sode, Alper Bozkurt, Michael Daniele

Advanced Electronic Materials · 2026-07 · 12 (14)

DOI: 10.1002/aelm.202600004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Electronic Materials, online erschienen am 06.04.2026. Verfasst von Kirstie M. K. Queener und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, National Institutes of Health, National Institute on Disability, Independent Living, and Rehabilitation Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The growth of wearable electrophysiology is accelerating demand for gel‐free biopotential electrodes that are skin‐conformal, comfortable for extended use, and stable under typical human motion. Here we report σPOMaC, a self‐adhesive, conductive, skin‐compatible elastomer based on poly(octamethylene maleate (anhydride) citrate) (POMaC), a citrate‐derived polyester with mechanical characteristics that are easily tunable via changes to monomer ratios and curing. Although POMaC is readily processed into soft structures, achieving robust electronic conductivity that survives curing, drying, and handling remains challenging, hindering its use in bioelectronic interfaces. To address this, we co‐formulate a soft conductor, poly(3,4‐ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS), with a surfactant, 4‐dodecylbenzenesulfonic acid (DBSA), into the POMaC prepolymer to generate conductive σPOMaC composites. Because these additives affect processing parameters and material properties, such as curing time and viscoelasticity, we optimized composition and processing to jointly achieve high conductivity (50 S/cm; ∼ 0.02 Ω·cm), skin‐appropriate adhesion (0.013 ± 0.004 N/mm on PDMS), and elastomeric compliance suitable for biopotential recording. Using optimized σPOMaC, we fabricated a custom chest patch featuring conformal ECG electrodes and demonstrated clear, high‐fidelity on‐body ECG waveforms comparable in morphology and timing to simultaneous recordings made using commercial Ag/AgCl electrodes. Together, these results position σPOMaC as a material platform for gel‐free, self‐adhesive, skin‐interfaced bioelectronic electrodes, enabling simplified application and improved interface with the end‐user and reducing disposable hydrogel waste in longitudinal monitoring.

Förderung

  • National Science Foundation
  • National Institutes of Health
  • National Institute on Disability, Independent Living, and Rehabilitation Research

Zitieren

APA

Queener, K. M. K., Brewer, A., Sun, H., Twiddy, J., Pozdin, V. A., Sode, K., Bozkurt, A., & Daniele, M. (2026). Self‐Adhesive Conductive Elastomers for Gel‐Free Biopotential Recording. Advanced Electronic Materials, 12(14). https://doi.org/10.1002/aelm.202600004

Vancouver

Queener KMK, Brewer A, Sun H, Twiddy J, Pozdin VA, Sode K, et al. Self‐Adhesive Conductive Elastomers for Gel‐Free Biopotential Recording. Advanced Electronic Materials. 2026;12(14). doi:10.1002/aelm.202600004

BibTeX
@article{Queener2026,
  author = {Queener, Kirstie M. K. and Brewer, Alec and Sun, He and Twiddy, Jack and Pozdin, Vladimir A. and Sode, Koji and Bozkurt, Alper and Daniele, Michael},
  title = {Self‐Adhesive Conductive Elastomers for Gel‐Free Biopotential Recording},
  journal = {Advanced Electronic Materials},
  year = {2026},
  volume = {12},
  number = {14},
  doi = {10.1002/aelm.202600004}
}
Kostenlos starten →