Human Skin‐Inspired Flexible Pressure Sensor with Multi‐Modulus Porous Structure
Advanced Electronic Materials · 2026-02 · 12 (4)
DOI: 10.1002/aelm.202500629 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Electronic Materials, online erschienen am 21.01.2026. Verfasst von Hyeongmin Park und 12 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and ICT, South Korea.
Abstract (Originalsprache)
Despite significant advances being made in pressure sensor technologies, driven by increasing demand for wearable devices, future Internet of Things (IoT) applications, and electronic skin (e‐skin), critical challenges persist in achieving high sensitivity, high pressure resolution, rapid response, and a wide linear range. Here, we report a cost‐effective and easy‐to‐fabricate pressure sensor that simultaneously achieves high sensitivity and an extensive linear operating range by emulating the multi‐modulus structure of human skin. Typically, these two properties are inversely related, rendering their simultaneous optimization highly challenging. Our sensor design employs a porous structure, composed of two layers of distinct moduli; this is achieved by precisely adjusting the base to crosslinker ratio of polydimethylsiloxane mixed with multi‐walled carbon nanotubes (MWCNTs). The synergistic effect of the MWCNTs and porous structure results in a high sensitivity (2.24 kPa − 1 ), while the dual‐modulus configuration extends the linear response (up to 45 kPa). Moreover, the sensor demonstrates excellent reproducibility and can maintain a stable response even after 6000 cycles of mechanical deformation at 15 kPa. These findings underscore the sensor's efficacy in diverse pressure detection scenarios and its potential for applications in human–machine interface systems and soft robotics.
Förderung
- Ministry of Science and ICT, South Korea
Zitieren
APA
Park, H., Kim, J., Kim, M., Noh, C., Myoung, S., Lim, H., Han, J., Park, C., Choi, C., Lee, E., Park, S., Kim, D., & Lee, G. (2026). Human Skin‐Inspired Flexible Pressure Sensor with Multi‐Modulus Porous Structure. Advanced Electronic Materials, 12(4). https://doi.org/10.1002/aelm.202500629
Vancouver
Park H, Kim J, Kim M, Noh C, Myoung S, Lim H, et al. Human Skin‐Inspired Flexible Pressure Sensor with Multi‐Modulus Porous Structure. Advanced Electronic Materials. 2026;12(4). doi:10.1002/aelm.202500629
BibTeX
@article{Park2026,
author = {Park, Hyeongmin and Kim, Jinsung and Kim, Minwoo and Noh, Changhyun and Myoung, Sumin and Lim, Hyeona and Han, Jaehee and Park, Chulhwan and Choi, Chungryong and Lee, Eunho and Park, Sungjun and Kim, Daegun and Lee, Giwon},
title = {Human Skin‐Inspired Flexible Pressure Sensor with Multi‐Modulus Porous Structure},
journal = {Advanced Electronic Materials},
year = {2026},
volume = {12},
number = {4},
doi = {10.1002/aelm.202500629}
}
EUVIMED