EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of a Nb‐Based Semiconductor‐Superconductor Hybrid 2DEG Platform

Sjoerd Telkamp, Tommaso Antonelli, Clemens Todt, Manuel Hinderling, Marco Coraiola, Daniel Haxell, Sofieke C. ten Kate, Deividas Sabonis, Peng Zeng, Rüdiger Schott, Erik Cheah, Christian Reichl und 3 weitere

Advanced Electronic Materials · 2025-05 · 11 (7)

DOI: 10.1002/aelm.202400687 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Electronic Materials, online erschienen am 15.01.2025. Verfasst von Sjoerd Telkamp und 14 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerstvo Školství, Mládeže a Tělovýchovy, Grantová Agentura České Republiky, European Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Semiconductor‐superconductor hybrid materials are used as a platform to realize Andreev bound states, which hold great promise for quantum applications. These states require transparent interfaces between the semiconductor and superconductor, which are typically realized by in‐situ deposition of an Al superconducting layer. Here a hybrid material is presented, based on an InAs 2D electron gas (2DEG) combined with in‐situ deposited Nb and NbTi superconductors, which offer a larger operating range in temperature and magnetic field due to their larger superconducting gap. The inherent difficulty associated with the formation of an amorphous interface between III‐V semiconductors and Nb‐based superconductors is addressed by introducing a 7 nm Al interlayer. The Al interlayer provides an epitaxial connection between an in‐situ magnetron sputtered Nb or NbTi thin film and a shallow InAs 2DEG. This metal‐to‐metal epitaxy is achieved by optimization of the material stack and results in an induced superconducting gap of approximately 1 meV, determined from transport measurements of superconductor‐semiconductor Josephson junctions. This induced gap is approximately five times larger than the values reported for Al‐based hybrid materials and indicates the formation of highly‐transparent interfaces that are required in high‐quality hybrid material platforms.

Förderung

  • Ministerstvo Školství, Mládeže a Tělovýchovy
  • Grantová Agentura České Republiky
  • European Research Council
  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung

Zitieren

APA

Telkamp, S., Antonelli, T., Todt, C., Hinderling, M., Coraiola, M., Haxell, D., Kate, S. C. T., Sabonis, D., Zeng, P., Schott, R., Cheah, E., Reichl, C., Nichele, F., Krizek, F., & Wegscheider, W. (2025). Development of a Nb‐Based Semiconductor‐Superconductor Hybrid 2DEG Platform. Advanced Electronic Materials, 11(7). https://doi.org/10.1002/aelm.202400687

Vancouver

Telkamp S, Antonelli T, Todt C, Hinderling M, Coraiola M, Haxell D, et al. Development of a Nb‐Based Semiconductor‐Superconductor Hybrid 2DEG Platform. Advanced Electronic Materials. 2025;11(7). doi:10.1002/aelm.202400687

BibTeX
@article{Telkamp2025,
  author = {Telkamp, Sjoerd and Antonelli, Tommaso and Todt, Clemens and Hinderling, Manuel and Coraiola, Marco and Haxell, Daniel and Kate, Sofieke C. ten and Sabonis, Deividas and Zeng, Peng and Schott, Rüdiger and Cheah, Erik and Reichl, Christian and Nichele, Fabrizio and Krizek, Filip and Wegscheider, Werner},
  title = {Development of a Nb‐Based Semiconductor‐Superconductor Hybrid 2DEG Platform},
  journal = {Advanced Electronic Materials},
  year = {2025},
  volume = {11},
  number = {7},
  doi = {10.1002/aelm.202400687}
}
Kostenlos starten →