Thin‐Film Assisted Laser Transfer and Bonding (TFA‐LTAB) for the Fabrication of Micro‐LED Displays
Advanced Electronic Materials · 2025-03 · 11 (3)
DOI: 10.1002/aelm.202400380 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Electronic Materials, online erschienen am 12.12.2024. Verfasst von Taifu Lang und 13 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Fujian Science and Technology Innovation Laboratory for Optoelectronic Information of China.
Abstract (Originalsprache)
Micro‐Light Emitting Diodes (Micro‐LEDs) are key components in the field of next‐generation display technologies. In the process of making Micro‐LED displays, millions of chips need to be transferred to the driver substrate using mass transfer technology. Conventional transfer techniques, such as stamp transfer, present challenges in terms of processing efficiency and applicability due to the need for pre‐prepared tethered structures and fixed chip pitch. To overcome these limitations, the t hin‐film‐assisted laser transfer and bonding (TFA‐LTAB) technology is proposed. This technique is able to efficiently and accurately transfer Micro‐LEDs from the source substrate to the driver substrate with arbitrary pitch through thin‐film assistance, and electrically connects the chips through flip‐chip bonding technology, which significantly improves the efficiency and reliability of the transfer and joining. The TFA‐LTAB method proposed in this study integrates laser transfer and flip‐chip bonding techniques. Through the TFA‐LTAB process, these Micro‐LEDs cultured on sapphire substrates are precisely assembled onto transparent low‐temperature polycrystalline silicon thin‐film transistors (LTPS‐TFTs). The method successfully achieved mass transfer and bonding of Micro‐LEDs with a size of 30 × 15 µm 2 at low temperature (180 °C) and low pressure (0.08 MPa).
Förderung
- National Key Research and Development Program of China
- Fujian Science and Technology Innovation Laboratory for Optoelectronic Information of China
Zitieren
APA
Lang, T., Lin, X., Huang, X., Xie, Y., Bai, S., Zhou, Y., Wang, S., Lu, Y., Tang, X., Lin, C., Huang, Z., Zhang, K., Yan, Q., & Sun, J. (2025). Thin‐Film Assisted Laser Transfer and Bonding (TFA‐LTAB) for the Fabrication of Micro‐LED Displays. Advanced Electronic Materials, 11(3). https://doi.org/10.1002/aelm.202400380
Vancouver
Lang T, Lin X, Huang X, Xie Y, Bai S, Zhou Y, et al. Thin‐Film Assisted Laser Transfer and Bonding (TFA‐LTAB) for the Fabrication of Micro‐LED Displays. Advanced Electronic Materials. 2025;11(3). doi:10.1002/aelm.202400380
BibTeX
@article{Lang2025,
author = {Lang, Taifu and Lin, Xin and Huang, Xiaowei and Xie, Yujie and Bai, Shuangjia and Zhou, Yijian and Wang, Shuaishuai and Lu, Yu and Tang, Xuehuang and Lin, Chang and Huang, Zhonghang and Zhang, Kaixin and Yan, Qun and Sun, Jie},
title = {Thin‐Film Assisted Laser Transfer and Bonding (TFA‐LTAB) for the Fabrication of Micro‐LED Displays},
journal = {Advanced Electronic Materials},
year = {2025},
volume = {11},
number = {3},
doi = {10.1002/aelm.202400380}
}
EUVIMED